As per Newton's law of viscosity, the shear stress for a given rate of angular deformation of fluid is proportional to(where, μ = fluid viscosity)?

1/μ
μ
μ²
1/μ²

LohaHridoy

5 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 2

Let'

5 views Answered 2022-09-01 13:21

Related Questions

When a body is subjected to biaxial stress i.e. direct stresses ($${\sigma _{\text{x}}}$$) and ($${\sigma _{\text{y}}}$$) in two mutually perpendicular planes accompanied by a simple shear stress ($${\tau _{{\text{xy}}}}$$ ), then maximum shear stress is?

1 Answers 5 Views

When a body is subjected to a direct tensile stress ($${\sigma _{\text{x}}}$$) in one plane accompanied by a simple shear stress ($${\tau _{{\text{xy}}}}$$ ), the maximum shear stress is?

1 Answers 5 Views

Whenever some external system of forces acts on a body, it undergoes some deformation. As the body undergoes some deformation, it sets up some resistance to the deformation. This resistance per unit area to deformation, is called?

1 Answers 4 Views

According to maximum shear stress failure criterion, yielding in material occurs, when the maximum shear stress is equal to __________ times the yield stress.?

1 Answers 7 Views

The strain energy stored in a body due to shear stress, is (where $$\tau $$ = Shear stress, C = Shear modulus and V = Volume of the body)?

1 Answers 5 Views

In Newton's law of viscosity, which states that the shear stress is proportional to the __________ Co-efficient of viscosity is called dynamic or absolute viscosity(where, V = velocity, Vg = velocity gradient ).?

1 Answers 5 Views

A fluid which has a linear relationship between the magnitude of applied shear-stress and the resulting rate of deformation is called a/an __________ fluid.?

1 Answers 5 Views

Which of the following must be followed by the flow of a fluid (real or ideal) (I) Newton's law of viscosity.(II) Newton's second law of motion. (III) The continuity equation.(IV) Velocity of boundary layer must be zero relative to boundary.(V) Fluid cannot penetrate a boundary.?

1 Answers 9 Views

Which law/principle of solid mechanics is similar/equivalent to Newton's law of viscosity in fluid mechanics?

1 Answers 8 Views

The design stress, which is more than the damaging stress, is the least unit stress that will render a member unfit for service before the end of its normal life. The design stress factor or factor of safety indicates the margin between design stress and the __________ stress.?

1 Answers 5 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)