The maximum deflection of a cantilever beam of length '$$l$$' with a uniformly distributed load of 'w' per unit length is (where W = w$$l$$)?

$$\frac{{{\text{W}}{l^3}}}{{3{\text{E}}I}}$$
$$\frac{{{\text{W}}{l^3}}}{{8{\text{E}}I}}$$
$$\frac{{{\text{W}}{l^3}}}{{16{\text{E}}I}}$$
$$\frac{{{\text{W}}{l^3}}}{{48{\text{E}}I}}$$

LohaHridoy

5 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 2

Let'

5 views Answered 2022-09-01 13:21

Related Questions

For a simply supported beam of length 'L', when a concentrated load W is applied in the center of the beam, the maximum deflection is?

1 Answers 5 Views

For a beam, as shown in the below figure, when the load W is applied in the center of the beam, the maximum deflection is?

1 Answers 12 Views

When a uniformly distributed load, shorter than the span of the girder, moves from left to right, then the conditions for maximum bending moment at a section is that?

1 Answers 5 Views

When a uniformly distributed load, longer than the span of the girder, moves from left to right, then the maximum bending moment at mid section of span occurs when the uniformly distributed load occupies?

1 Answers 6 Views

For a beam, as shown in the below figure, the deflection at C is (where E = Young's modulus for the beam material and $$I$$ = Moment of inertia of the beam section.)?

1 Answers 5 Views

A simply supported beam of length 'l' carries a point load 'W' at a point C as shown in the below figure. The maximum deflection lies at?

1 Answers 9 Views

The natural frequency of free transverse vibrations due to uniformly distributed load acting over a simply supported shaft is (where $$\delta {\text{S}}$$ = Static deflection of simply supported shaft due to uniformly distributed load)?

1 Answers 8 Views

A load which is spread over a beam in such a manner that it varies uniformly over the whole length of abeam is called uniformly ________ load.?

1 Answers 6 Views

A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is?

1 Answers 6 Views

The maximum pull in a cable, carrying a uniformly distributed load and supported at two ends which are at the same level, is at?

1 Answers 4 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)