When the shaft rotates in anticlockwise direction at high speed in a bearing, it will?

Have contact at the bottom most of the bearing
Move towards right of the bearing making metal to metal contact
Move towards right of the bearing making no metal to metal contact
Move towards left of the bearing making metal to metal contact

LohaHridoy

4 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 3

Let'

4 views Answered 2022-09-01 13:21

Related Questions

According to Fleming's right-hand rule for finding the direction of induced e.m.f., when middle finger points in the direction of induced e.m.f., forefinger will point in the direction of?

1 Answers 5 Views

When the bearing is subjected to large fluctuations of load and heavy impacts, the bearing characteristic number should be _________ the bearing modulus.?

1 Answers 4 Views

When the shaft rotates in anticlockwise direction at slow speed in a bearing, it will?

1 Answers 6 Views

A direction pole was situated on the crossing. Due to an accident the pole turned in such a manner that the pointer which was showing East, started showing South. One traveler went to wrong direction thinking to be West. In what direction actually he was traveling?

1 Answers 4 Views

The frictional torque transmitted in a flat pivot bearing, considering uniform wear, is (where μ = Coefficient of friction, W = Load over the bearing and R = Radius of bearing surface)?

1 Answers 5 Views

The frictional torque transmitted in a flat pivot bearing, assuming uniform wear, is (Where μ = Coefficient of friction, W = Load over the bearing, R = Radius of bearing)?

1 Answers 5 Views

The natural frequency of free torsional vibrations of a shaft is equal to (where q = Torsional stiffness of the shaft and $$I$$ = Mass moment of inertia of the disc attached at the end of a shaft)?

1 Answers 6 Views

The radius of a friction circle for a shaft rotating inside a bearing is (where r = Radius of shaft and $$\tan \varphi $$ = Coefficient of friction between the shaft and bearing)?

1 Answers 15 Views

The torque required to overcome viscous resistance of a footstep bearing is (where μ = Viscosity of the oil, N = Speed of the shaft, R = Radius of the shaft, and t = Thickness of the oil film)?

1 Answers 10 Views

The property of a bearing material which has the ability to accommodate shaft deflections and bearing inaccuracies by plastic deformation without excessive wear and heating, is known as?

1 Answers 6 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)