Water Supply Engineering MCQ
Test your knowledge with important Water Supply Engineering MCQ and their applications. These MCQs are beneficial for competitive exams too. Explore 30+ more Water Supply Engineering MCQs on Bissoy. Bissoy App
-
The yield of a rapid gravity filter as compared to that of slow sand filter, is
-
In centrifugal pump installation,
-
In pressure supply mains, water hammer pressure is reduced by providing
-
Sunlight
-
Asbestos pipes are
-
In distribution pipes, drain valves are provided at
-
Turbidity of raw water is a measure of
-
If the chosen diameter of a pipe, is less than the economical diameter
-
Corrosion of well pipes may not be reduced by
-
The maximum depth of sedimentation tanks is limited to
-
The least thickness of class B cast iron (spun) pipe, is
-
Specific capacity or yield of wells, is generally expressed, as
-
Disinfection of drinking water, is done to remove
-
Aeration of water is done to remove
-
For determining the velocity of flow of underground water, the most commonly used non-empirical formula is
-
Biochemical Oxygen Demand (B.O.D.) of safe drinking water must be
-
Surge tanks are used
-
Surcharge storage zone of a reservoir, is
-
The process of passing water through beds of granular materials, is called
-
When the reduced level of the water source is higher than the reduced level of the consumer's place, water is generally supplied
-
In slow sland filters, the turbidity of raw water can be removed only up to
-
By boiling water, hardness can be removed if it is due to
-
The factor affecting per capita demand, is
-
For the prediction of future population of a city, the factor to be considered, is
-
While determining the yield of open wells by the pumping test
-
Average annual rainfall at any station is the average of annual rainfall over a period of
-
Time of concentration
-
The specific retention is least in case of
-
Acidity in water is caused due to
-
Mathamoglobinemia or blue baby disease is caused due to