Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

The parallel combination of a 6.8 kΩ resistor and a 10 kΩ resistor is in series with the parallel combination of a 2.2 kΩ resistor and a 1 kΩ resistor. A 100 V source is connected across the circuit. The resistor(s) with the greatest voltage drop is (are)
Two resistors are in series: a 5.6 kΩ resistor and a 4.7 kΩ resistor. The voltage drop across the 5.6 kΩ resistor is 10 V. The voltage across the 4.7 kΩ resistor is
What are the steps required in sequence to solve a circuit using superposition theorem? (a) Select any one source and short circuit all other voltage sources. (b) Find out the current or voltage across the required element, due to the source under consideration. (c) Open all current sources, if the internal impedance is not known. If known replace them by their impedances. (d) Add all the individual effects produced by individual sources to obtain the total current in or across the voltage element. Code :
The input voltage V1 of the circuit the circuit is 2V and resistor has a resistance of 1KΩ. The cut-in voltage of the silicon diode is 0.7V and the reverse saturation current is 10-8A. The temperature at which diode operates is 30°C. The voltage across resistor when diode starts conducting is _________________
Consider the following statements: 1. The voltage developed across the OFF switches of the half-bridge converter is the maximum dc-link voltage. 2. In the full-bridge converter, the voltage across the primary of the transformer is the dc link voltage. 3. The voltage developed across the OFF switches of the full-bridge converter is half the maximum dc-link voltage. Which of the above statements are correct?
In a circuit a 33 Ohm resistor carries a current of 2 A. The voltage across the resistor is
What is the source voltage applied across a loop containing a resistor of 1000 ohm and capacitor of 15 microfarads in series when a current of 0.02 ampere flows across the circuit? Given that the voltage drop across capacitor is 5 Volts?
What is the source voltage applied across a loop containing a resistor of 100 ohm and capacitor of 15 microfarads in series when a current of 0.05 ampere flows across the circuit? Given that the voltage drop across capacitor is 2 Volts?
What is the source voltage applied across a loop containing a resistor of 500 ohm and capacitor of 10 microfarads in series when a current of 0.02 ampere flows across the circuit? Given that the voltage drop across capacitor is 2 Volts.
A resistor carries a current 'I' and dissipates power ‘P’. What will be the power dissipated if the same resistor carries a current 4I?