Impedence and capacitance of a transmission line depend upon-

A Current in the line alone
B voltage in the line alone
C Both A and B
D Physical configuration of conductors in space

Correct Answer: Physical configuration of conductors in space

Bissoy MCQ
#তথ্য প্রযুক্তি #পিএসসি ও অন্যান্য নিয়োগ পরীক্ষা #বিভিন্ন মন্ত্রণালয় | সহকারী ম্যানটেনেন্স প্রকৌশলী | 24-05-2022

Related Questions

পাত-দূরত্ব d এবং ধারকত্ব C. এমন একটি সমান্তরাল পাত ধারকের পাত দুটির মাঝখানে d/2 পুরুত্ববিশিষ্ট একটি ধাতব পাত স্থাপন করা হলো। নতুন ধারকত্ব কত হবে? (A metal plate of thickness d/2 is inserted between the plates of a parallel plate capacitor with plate separation d and capacitance C. What is the new capacitance?)
A C/d
B C/2
C 4Cd
D 2c
কোনো খেলার সরাসরি সম্প্রচারের ডেটা ট্রান্সমিট হবার প্রক্রিয়া- (i) Broadcast Transmission (ii) Duplex Transmission (iii) Simplex Mode Transmission নিচের কোনটি সঠিক?
A i ও ii
B i ও iii
C ii ও iii
D i ii ও iii
The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the
A Feed material
B Type of crushing machine
C Both A & B
D Neither A nor B
Shell side pressure drop in a shell and tube heat exchanger does not depend upon the
A Baffle spacing & shell diameter
B Tube diameter & pitch
C Viscosity, density & mass velocity of shell side fluid
D None of these
In a multipass shell and tube heat exchanger, the shell side cross flow area does not depend upon
A Baffle spacing
B Clearance
C Pitch
D None of these
If there are no externally induced flow velocities, then the Nusselt Number (Nu) does not depend upon
A Prandtl number
B Reynolds number
C Grashof Number
D none of the
MUF is depend upon
A Electron density of the ionospheric layer
B 11 year sun spot cycle
C Received frequency by receiver
D Height of ionospheric layer
In a circular arc cam with roller follower, the acceleration in any position of the lift will depend only upon
A Total lift, total angle of lift, minimum radius of cam and cam speed
B Radius of circular arc, cam speed, location of centre of circular arc and roller diameter
C Mass of cam follower linkage, spring stiffness and cam speed
D Total lift, centre of gravity of the cam and cam speed
When a magnet is in motion relative to a coil the induced e.m.f. does not depend upon
A Resistance of the coil
B Motion of the magnet
C Number of turns of the coil
D Pole strength of the magnet
The total frictional resistance to fluid flow does not depend upon the
A Roughness of the surface
B Fluid pressure
C Fluid density
D Fluid velocity

Next steps