Related Questions

3/4th of square were taken to form shape A and the rest was made to form shape B. Shape A was divided into four equal squares (Shape C), what will be the ratio of the one shape C to one shape B.
A 1:4
B 3:16
C 1:2
D 3:4
When the addenda on pinion and wheel is such that the path of approach and path of recess are half of their maximum possible values, then the length of the path of contact is given by (where r = Pitch circle radius of pinion, R = Pitch circle radius of wheel and $$\varphi $$ = Pressure angle)
A $$\frac{{\left( {{{\text{r}}^2} + {{\text{R}}^2}} \right)\cos \varphi }}{2}$$
B $$\frac{{\left( {{{\text{r}}^2} + {{\text{R}}^2}} \right)\sin \varphi }}{2}$$
C $$\frac{{\left( {{\text{r}} + {\text{R}}} \right)\cos \varphi }}{2}$$
D $$\frac{{\left( {{\text{r}} + {\text{R}}} \right)\sin \varphi }}{2}$$
The path ______ paved, so we were able to walk through the path.
A was
B had been
C has been
D being
A arden is 60m long and 20m wide. Inside the garden there is a 5m wide path around it . The area of the path is in square meter .
A 700
B 650
C 375
D 500
The path-------paved, so we were able to walk through the path.
A was
B had been
C has been
D being
Outside a square garden there is a path of 5 metres width around it, If the area of the path is 500 square metres, what is the area of the garden?
A 250
B 300
C 400
D 450
A square park is surrounded by a path of uniform width 2 meters all around it. The area of the path is 288 sq. meters. Find the perimeter of the park.
A 34 m
B 1156 m
C 136 m
D Cannot be determined
This type of solid is formed by sweeping a shape along a linear path:
A Planar solid
B Revolved solid
C Warped solid
D Extruded solid
This is the last time I'm telling you to arrive on time. Shape up or ship out. Here, ‘’shape up or ship out'' means-
A either come in time or be punished
B either build your body or leave this tough job
C either walk or board the ship
D either perform better of quit
The energy loss in flow through ven-turimeter is less than that through flow nozzle, because in case of a flow nozzle, the
A Length is shorter
B Throat diameter is more
C Sudden expansion of flow in the downstream occurs
D Distance between the throat and the inlet is more

Next steps