This is a level at which normal issue of material are stopped, but issued under special condition It is ________.

A maximum stock level
B minimum stock level
C danger level
D average stock level

Correct Answer: danger level

This is a level at which normal issue of material are stopped, but issued under special condition It is danger level. Danger level is a level of fixed usually below the minimum level. When the stock reaches danger level, an urgent action for purchase is initiated.
Bissoy MCQ
#Commerce #Costing

Related Questions

A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are being withdrawn and feed to the column is stopped). At the new steady state,
A Composition of vapors and that of liquid do not vary throughout the column
B Reboiler load and condenser load are minimum
C The top and bottom compositions are unchanged with and without total reflux
D The top and bottom compositions correspond to the maximum enrichment available
The method in which issue prices of material is computed by dividing total purchase cost of material in stock with total quantity in stock ________.
A Simple average method
B weighted average method
C periodical average method
D periodic simple average method
An orthotropic material is a special class of anisotropic material, which is described by their properties in three perpendicular directions. An example of orthotropic material is
A Stainless steel
B Cast iron
C Wood
D Teflon
The wastage of material in the store is taken into account by the following method in the evaluation of the material issued from the store
A Inflated system
B Primary cost method
C Current value method
D Fixed price method
A national issue was won by a vote of 9 to 6. What part of the total vote was against the issue?
A 3/8
B 2/5
C 6/8
D 5/2
Choose the "Appropriate Preposition" to fill in the blank of the following sentence: 'The driver stopped just ________ time to avoid an accident.'
A in
B by
C at
D on
Break even point represents the condition, when the company runs under no profit no loss condition. In break even analysis, total cost comprises of fixed cost
A Only
B Plus variable cost
C Plus overhead cost
D Plus selling expenses
According to maximum normal stress theory, the maximum normal stress in the shaft is
A $$\frac{1}{2}\sqrt {{\sigma ^2} \times 4{\tau ^2}} $$
B $$\sqrt {{\sigma ^2} \times 4{\tau ^2}} $$
C $$\frac{1}{2}\left( {\sigma + \sqrt {{\sigma ^2} \times 4{\tau ^2}} } \right)$$
D $$\sigma + \sqrt {{\sigma ^2} \times 4{\tau ^2}} $$
When a body is subjected to a direct tensile stress (σ) in one plane, then maximum normal stress occurs at a section inclined at _________ to the normal of the section.
A 0°
B 30°
C 45°
D 90°
When a body is subjected to a direct tensile stress ($$\sigma $$) in one plane, then normal stress on an oblique section of the body inclined at an angle $$\theta $$ to the normal of the section is
A $$\sigma \cos \theta $$
B $$\sigma {\cos ^2}\theta $$
C $$\sigma \sin\theta $$
D $$\sigma {\sin ^2}\theta $$

Next steps