Related Questions

Perforated plate towers are unique for solvent extraction because, they provide
A Higher contact area
B Better contact of the phase
C Repeated coalescence & redispersion of the drop phase
D None of these
Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the
A Packing may be crushed due to thermal expansion/contraction of the components of the equipments
B Pressure drop in the equipment will be very high
C Viscosity variation of the fluids may cause channeling/flooding
D None of these
The reason for preferring packed towers over plate towers in distillation practice is that the packed tower operation gives
A Low pressure drop and high hold up
B High pressure drop and low hold up
C Low pressure drop and low hold up
D High pressure drop and high hold up
A. __________ mill is a revolving mill divided into two or more sections by perforated partitions in which preliminary grinding takes place at one end and the finishing grinding at the discharge end.
A Compartment
B Tube
C Rod
D Pebble
For a plate-modulated class C amplifier the plate supply voltage is E. The maximum plate cathode voltage could be almost high as
A 2E
B 3E
C 4E
D 6E
Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface.
A Plane
B Curved
C Ribbed
D Either A or B
A high vapour velocity is required for high plate efficiency in a seive plate coloumn. The satisfactory value of operating vapor velocity for design purpose in seive plate column is about __________ percent of the flooding velocity.
A 45
B 60
C 80
D 95
পাত-দূরত্ব d এবং ধারকত্ব C. এমন একটি সমান্তরাল পাত ধারকের পাত দুটির মাঝখানে d/2 পুরুত্ববিশিষ্ট একটি ধাতব পাত স্থাপন করা হলো। নতুন ধারকত্ব কত হবে? (A metal plate of thickness d/2 is inserted between the plates of a parallel plate capacitor with plate separation d and capacitance C. What is the new capacitance?)
A C/d
B C/2
C 4Cd
D 2c
Very tall packed towers are divided into series of beds to
A Reduce the overall pressure drop
B Avoid channelling
C Reduce liquid hold-up
D Avoid flooding
Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the
A High evaporation losses of water
B High pressure drop of the gas
C Difficulty in its fabrication
D None of these

Next steps