Related Questions

The mixing vat in a factory receives liquid ingredients through six separate value--- labeled R.S.T.U,Y and Z -- each of which has exactly two settings: open and closed.The mixing vat operator must ensure that each valve is set open or closed according to the following conditions: If T is open, both S and Z must be closed, R and Z cannot both be closed at the same time; If Y is closed, Z must also be closed;S and U cannot both be open at the same time. If the maximum number of valves that can be closed at the same time are closed which of the following must true?
A R is open
B S is open
C T is open
D Z is open
For a cylinderical internally pressurised vessel, which of the following closure types would withstand highest pressure, if each closure is of the same material and thickness?
A Hemispherical
B Ellipsoidal (2 : 1)
C Conical
D Flat plate
The mixing vat in a factory receives liquid ingredients through six separate value--- labeled R.S.T.U,Y and Z -- each of which has exactly two settings: open and closed.The mixing vat operator must ensure that each valve is set open or closed according to the following conditions: If T is open, both S and Z must be closed, R and Z cannot both be closed at the same time; If Y is closed, Z must also be closed;S and U cannot both be open at the same time. If R is closed and U is open, which of the following must be true?
A S is open
B T is open
C T is closed
D Y is closed
The mixing vat in a factory receives liquid ingredients through six separate value--- labeled R.S.T.U,Y and Z -- each of which has exactly two settings: open and closed.The mixing vat operator must ensure that each valve is set open or closed according to the following conditions: If T is open, both S and Z must be closed, R and Z cannot both be closed at the same time; If Y is closed, Z must also be closed;S and U cannot both be open at the same time. If Z is open, which of the following must be true?
A S is open
B T is open
C U is open
D y is open
The mixing vat in a factory receives liquid ingredients through six separate value--- labeled R.S.T.U,Y and Z -- each of which has exactly two settings: open and closed.The mixing vat operator must ensure that each valve is set open or closed according to the following conditions: If T is open, both S and Z must be closed, R and Z cannot both be closed at the same time; If Y is closed, Z must also be closed;S and U cannot both be open at the same time. Which of the following, if given to the mixing vat operator as an instruction, would not determine the setting of any other valve ?
A S must be open
B T must be open
C U must be open
The circumferential (hoop) stress in a thin walled cylinderical vessel under internal pressure is
A $$\frac{{{\text{pd}}}}{{2{\text{t}}}}$$
B $$\frac{{{\text{pd}}}}{{4{\text{t}}}}$$
C $$\frac{{{\text{pd}}}}{{\text{t}}}$$
D $$\frac{{{\text{pd}}}}{{3{\text{t}}}}$$
The longitudinal stress induced in a thin walled cylinderical vessel under internal pressure is
A $$\frac{{{\text{pd}}}}{{2{\text{t}}}}$$
B $$\frac{{{\text{pd}}}}{{4{\text{t}}}}$$
C $$\frac{{{\text{pd}}}}{{\text{t}}}$$
D $$\frac{{{\text{pd}}}}{{8{\text{t}}}}$$
For a given ambient air temperature with increase in the thickness of insulation of a hot cylinderical pipe, the rate of heat loss from the surface would
A Decrease
B Increase
C First decrease and then increase
D First increase and then decrease
Cylinderical shell thickness of rotary drier is generally __________ mm.
A 2-3
B 18-22
C 6-8
D 12-15
The fluid velocity varies as the cube of the cylinderical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid.
A Newtonion
B Pseudoplastic
C Dilatent
D Bingham plastic

Next steps