Related Questions

In the cyclone separator used for separation of dust from dust laden gas, the gas
A telephone switchboard 100 pair cable can be made up with either enameled wire or tinned wire. There will be 400 soldered connections. The cost of soldering a connection on the enameled wire will be P 1.65 on the tinned wire, it will be P 1.15. A 100- pair cable made up with enameled wire cost P 0.55 per linear foot and those made up of tinned wire cost P 0.75 per linear foot. Determine the length of cable run in feet so that the cost of each installation would be the same.
I1 is the current flowing in the first mesh. I2 is the current flowing in the second mesh and I3 is the current flowing in the top mesh. If all three currents are flowing in the clockwise direction, find the value of I1, I2 and I3.
Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for
Which of the following statements are correct? i) Physical separation – in which process use different physical objects like separate printers ii) Physical separation – in which process having different security requirement at different times iii) Logical separation – In which users operate under illusion that no other processes exist iv) Logical separation – In which processes conceal their data and computations
Which of the following statements are correct? i) Physical separation – in which process use different physical objects like separate printers ii) Temporal separation – in which process having different security requirement at different times iii) Physical separation – In which users operate under illusion that no other processes exist iv) Temporal separation – In which processes conceal their data and computations
Two metallic wires made from copper have same length but the radius of wire 1 is half of that of wire 2. The resistance of wire 1 is R. If both the wires are joined together in series, the total resistance becomes
Two metallic wires made from copper have same length but the radius of wire 1 is half of that of wire 2. The resistance of wire 1 is R. If both the wires are joined together in series, the total resistance becomes
An elevator is assembled to raise equipment to a height of 22m. It is estimated that maximum weight of the material to be raised is 4.9kN. It is observed acceleration in such cases is 1.2m/s².10mm diameter wire ropes with fibre core are used. The tensile designation of the wire is 1500.Number of rope wires is assumed to be 2. Calculate the weight of wire if weight of 50m wire is 18kg.
An elevator is assembled to raise equipment to a height of 22m. It is estimated that maximum weight of the material to be raised is 4.9kN. It is observed acceleration in such cases is 1.2m/s².10mm diameter wire ropes with fibre core are used. The tensile designation of the wire is 1500.Number of rope wires is assumed to be 2. Number of rope wires is assumed to be 2. Calculate the weight of wire if weight of 50m wire is 18kg. Calculate the force due to acceleration.