Related Questions

100 kg of solution A is mixed with 60 kg of solution B . If solution A has tin and copper in the ratio 1: 4 and solution B has lead and tin in the ratio 3 :2 then what is the amount of tin in the new solution?
A 70 kg
B 36 kg
C 44 kg
D 56 kg
Among the tin containing alloys, __________ consumes the maximum amount of tin.
A Solder
B White metal
C Pewter matal
D Bronzes
The frictional torque transmitted in a flat pivot bearing, considering uniform wear, is (where μ = Coefficient of friction, W = Load over the bearing and R = Radius of bearing surface)
A $$\frac{1}{2}$$μWR
B $$\frac{2}{3}$$μWR
C $$\frac{3}{4}$$μWR
D μWR
When the bearing is subjected to large fluctuations of load and heavy impacts, the bearing characteristic number should be _________ the bearing modulus.
A 10 times
B 5 times
C 15 times
D 20 times
If p = bearing pressure on projected bearing area, Z = absolute viscosity of lubricant and N = speed of journal, then the bearing characteristic number is given by
A $$\frac{{{\text{ZN}}}}{{\text{p}}}$$
B $$\frac{{\text{p}}}{{{\text{ZN}}}}$$
C $$\frac{{\text{Z}}}{{{\text{pN}}}}$$
D $$\frac{{\text{N}}}{{{\text{Zp}}}}$$
Which of the following alloys contains tin?
A brass
B solder
C duralumin
D steel
The addition of antimony in tin-based alloys improves its
A Rupture strength and hot hardness
B Impact strength and bonding strength
C Deformation resistance
D Wear resistance
Which of the following alloys does not contain tin?
A White metal
B Solder admiralty
C Fusible metal
D Phosphor bronze
e-TIN 46-(e-TIN was introduced in -)
A 2020
B 2003
C 1992
D 2013
At a college football game, 4/5 of the seats in the lower deck of the stadium were sold. If one-fourth of all the seating in the stadium is located in the lower deck, and if 2/3 of all the seats in the stadium were sold, what fraction of the unsold seats in the stadium were in the lower deck?
A 3/20
B 1/6
C 1/3
D 7/15

Next steps