Related Questions

10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংয়ের গুণাঙ্ক তামার ইয়ংয়ের গুণাঙ্কের দুইগুণ হলে লোহার দৈর্ঘ্য বৃদ্ধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? ( A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young's modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1 :8
B 1 : 6
C 1 : 4
D 1 : 2
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংকের গুণাস্ক তামার ইয়ংকের গুণাস্কের দুইগুন হলে লোহার দৈর্ঘ্য বৃধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? (A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young‘s modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1:8
B 1:6
C 1:4
D 1:2
Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets.
A Chromium
B Nickel
C Tungsten
D Cobalt
A steel mill produces 180 tons of steel per month Raw materials cost for each ton of production is Tk. 1200. Other expenses of that mill are Tk. 90,000 in each month what should be the selling price of each ton of steel in order to make 10% profit?
A 1870
B 1845
C 1842
D 18145
The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is _________ cutting speed for drilling mild steel with high speed steel drills.
A Equal to
B Less than
C More than
D None of these
Which of the following steel making process is being adopted at Rourkela (in India) Steel Plant?
A Bessemer process
B Open hearth process
C Electric process
D LD process
The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel.
A 60 - 100
B 400 - 700
C 1200 -1500
D 2000 - 2300
The system in which high tensile alloy steel bars (silica manganese steel) are used as pre-stressing tendons, is known as
A Freyssinet system
B Magnel-Blaton system
C C.C.L. standard system
D Lee-McCall system
The steel used in steel cored conductors is usually
A Alloy steel
B Stainless steel
C Mild steel
D High speed steel
For accurate work, the steel band should always be used in preference to chain because the steel band
A is lighter than chain
B is easier to handle
C is practically inextensible and is not liable to kinks when in use
D can be easily repaired in the field

Next steps