Related Questions

In case of saddle packing (e.g., berl and intralox saddles), the maximum size of the packing should not exceed __________ of the column diameter.
Hollow saddle key is superior to flat saddle key as far as power transmitting capability is concerned.
In industries titanium is hardened through diffusion of carbon. The concentration of carbon at 1mm into the surface of the titanium slab is 0.25kg/m3 and at 3mm the concentration is 0.68kg/m3. The rate at which the carbon is entering into its surface is 1.27*10-9kg/m2.s. calculate the value of diffusion coefficient of carbon.
In the carbonation of a soft drink, the total quantity of carbon dioxide required is the equivalent of 3 volumes of gas to one volume of water at 0⁰C and atmospheric pressure. Calculate (i) the mass fraction and (ii) the mole fraction of the CO2 in the drink, ignoring all components other than CO2 and water. Basis 1 m3 of water = 1000 kg Volume of carbon dioxide added = 3 m3 From the gas equation, pV = nRT 1 x 3 = n x 0.08206 x 273 n = 0.134 mole. Molecular weight of carbon dioxide = 44 And so weight of carbon dioxide added = 0.134 x 44 = 5.9 kg
Combined carbon content in iron and steel is determined by treating the sample with dilute HNO3. So that combined carbon forms a soluble brown nitrated compound, the intensity of which is matched with that of a standard sample of similar composition treated under similar condition. The intensity of color produced is proportional to the carbon content of iron of steel sample. This method of combined carbon determination is called the
A solid-oxide fuel cell is fed with carbon monoxide and reacts with air to produce CO2. This reaction will produce 2 electrons which are used to power an electric circuit external to the fuel cell. The reaction equation is shown below: 2CO(g) + O2(g) -> 2CO2(g) ΔHr° = -565.96 kJ/mol This reaction does not occur for other types of fuel cells which use a catalyst, such as polymerelectrolyte membrane or phosphoric-acid fuel cells. The presence of carbon monoxide on the anode side of these types of fuel cells will cause catalyst poisoning, reducing the efficiency and voltage of the fuel cell. Determine the rate of enthalpy change for a carbon dioxide production rate of 208 mol/hr. The extent of the reaction occurring in the fuel cell can be obtained by the following equation: where:
Saddle supports are used for supporting __________ vessels.
Solution-1 containing 40% nitric acid and 20% carbon dioxide at the rate F combines with Solution-2 containing 30% nitric acid and 40% carbon dioxide at the rate D, the product formed contains 30% nitric acid and 20% carbon dioxide at the rate P, If P = xF what is x?
Solution-1 containing 40% acetic acid and 20% carbon dioxide at the rate F combines with Solution-2 containing 20% acetic acid and 40% carbon dioxide at the rate D, the product formed contains 30% acetic acid at the rate P, what is the percentage of carbon dioxide in product?
Pentane is burnt to produce carbon dioxide 40% of which can be converted into carbon monoxide, how much Butane must be burnt to produce 176 grams of carbon monoxide?