Related Questions

Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water.
A Boiling point
B Dynamic viscosity
C Kinematic viscosity
D Density
The distillation carried out in such a way that the liquid with the lowest boiling point is first evaporated and re-condensed, then the liquid with the next higher boiling point is then evaporated and re-condensed, and so on until all the available liquid fuels are separately recovered in the sequence of their boiling points. Such a process is called
A Cracking
B Fractional distillation
C Full distillation
D Carbonisation
Solution X contains 7% (by weight) of liquid M and solution Y contains 14.5% (by weight) of liquid M. If 3 grams of solution X is mixed with 2 grams of solution Y, then liquid M accounts for what percent of the weight of the resulting solution?
A 6.09%
B 10%
C 10.75%
D 21.5%
100 kg of solution A is mixed with 60 kg of solution B . If solution A has tin and copper in the ratio 1: 4 and solution B has lead and tin in the ratio 3 :2 then what is the amount of tin in the new solution?
A 70 kg
B 36 kg
C 44 kg
D 56 kg
Solution X is 10% percent alcohol by volume, and solution Y is 30 percent alcohol by volume. How many milliliters of solution Y must be added to 200 milliliters of solution X to create a solution that is 25 percent alcohol by volume?
A 600
B 800
C 300
D 250
E None of these
The elevation in boiling point of a solution is proportional to the __________ of the solution.
A Molal concentration
B Reciprocal of the molal concentration
C Normality
D Molarity
Point A is 10 miles West of Point B. Point b is 30 miles North of pint C. Point C is 20 miles East of Point D. What is the distance (in miles) between Point A and Point D?
A 1010
B 1020
C 2010
D 3010
Point A is 10 km west of point B. Point B is 30 km north of point C. Point C is 20 km east of point D. What is the distance between point A and D?
A 1020Km
B 1010Km
C 2010Km
D 3010Km
Solution X contains 40% salt and 60% water by weights, Solution Y contains 25% salt and 75% water. If a mixture of X and Y contains 30% salt. What percent of the weight of this mixture is solution X?
A 10%
B 33.3%
C 40%
D 42.5%
Even though heat transfer co-efficients in boiling liquids is large, use of fins is advantageous, when the entire surface is exposed to __________ boiling.
A Film
B Nucleate
C Transition
D All of the above

Next steps