Related Questions

Air entrainment in the concrete increases
A Workability
B Strength
C The effects of temperature variations
D The unit weight
Which of the following factors determine the amount of entrainment in a distillation column?
A Plate spacing
B Depth of liquid above the bubble cap slots
C Vapour velocity in the volume between the plates
D All of the above
The average of 17 results is 60. If the average of first 9 results is 57 and that of the last 9 results is 65, then what will be the value of 9th result?
A 39
B 78
C 117
D 156
The separation of liquid droplets from the vapor is done by a/an __________ , in the evaporators.
A Steam ejector
B Entrainment separator
C Compressor
D Vacuum pump
The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid.
A Viscosity
B Density
C Thermal conductivity
D Corrosive nature
Solution X contains 7% (by weight) of liquid M and solution Y contains 14.5% (by weight) of liquid M. If 3 grams of solution X is mixed with 2 grams of solution Y, then liquid M accounts for what percent of the weight of the resulting solution?
A 6.09%
B 10%
C 10.75%
D 21.5%
The angle of contact between a glass capillary tube of length 10 cm and a liquid is 90 degree . If the capillary tube is dipped vertically in the liquid, then the liquid:
A Will rise in the tube
B Will get depressed in the tube
C Will rise -up to 10 cm in the tube and will over flow
D Will neither rise nor fall in the tube.
The angle of contact between a glass capillary tube of length 10 cm and a liquid is 90 Degree. If the capillary tube is dipped vertically in the liquid, then the liquid:
A Will rise in the tube
B Will get depressed in the tube
C Will rise-up to 10 cm in the tube and will over flow
D Will neither rise not fall in the tube
The distillation carried out in such a way that the liquid with the lowest boiling point is first evaporated and re-condensed, then the liquid with the next higher boiling point is then evaporated and re-condensed, and so on until all the available liquid fuels are separately recovered in the sequence of their boiling points. Such a process is called
A Cracking
B Fractional distillation
C Full distillation
D Carbonisation
The property of a liquid which offers resistance to the movement of one layer of liquid over another adjacent layer of liquid, is called
A Surface tension
B Compressibility
C Capillarity
D Viscosity

Next steps