Related Questions

Heat conducted through per unit area and unit thick face per unit time when temperature difference between opposite faces is unity, is called
A Thermal resistance
B Thermal coefficient
C Temperature gradient
D Thermal conductivity
A ladder is resting against a vertical wall and its bottom is 2.5 m away from the wall. If it slips 0.8 m down the wall, then its bottom will move away from the wall by 1.4 m. What is the length of the ladder?
A 6.2 m
B 6.5 m
C 6.8 m
D \7.5 m
A marble ball is rolled on a smooth floor of a room to hit a wall. If the time taken by the ball in returning to the point of projection is twice the time taken in reaching the wall, the coefficient of restitution between the ball and the wall, is
A 0.25
B 0.50
C 0.75
D 1.0
A glass ball is shot to hit a wall from a point on a smooth floor. If the ball returns back to the point of projection in twice the time taken in reaching the wall, the coefficient of restitution between the glass ball and the wall is
A 0.25
B 0.33
C 0.40
D 0.50
A painter has painted one-third of a rectangular wall which is ten feet high. When he will paint another 75 square feet of that wall, he will have finished three-quarters of the job. What is the length (the horizontal dimension) of the wall?
A 18 feet
B 12 feet
C 10 feet
D 9 feet
A painter has painted one -third of a rectangular wall which is ten feet high. When he will paint another 75 square feet of that wall, he will have finished three-quaters of the job. What is the length (the horizontal dimension) of the wall?
A 18 feet
B 12 feet
C 10 feet
D 9 feet
A painter has painted 1/3 of a rectangular wall that is 12 feet high. When he will paint another 50 square feet of the wall he will have finished 50% of the job. What is the length of the wall?
A 25
B 50
C 15
D 20
If ‘H’ is the height of wall between centers of supports, then the effective height of wall where concrete floors have a bearing on wall irrespective of the direction of span will be
A 0.75 H
B 0.85 H
C 1.0 H
D 1.5 H
Heat transfer to the water wall in a high pressure water wall type boiler furnace is mainly by
A Conduction
B Convection
C Both A & B
D Radiation
Factor of safety (i.e., overdesign factor) in heat transfer equipments is about __________ percent more than the actual/theoretical design factor.
A 5-10
B 15-20
C 30-35
D 35-40

Next steps