Related Questions

The Reynolds number is found out for a flow in a circular pipe. This circular pipe is moulded into a square pipe, keeping length of the pipe same. Ignore the thickness of the pipe. The Reynolds number changes by __________
Two pipes A and B can fill an empty cistern in 18 and 27 hours, respectively. Pipe C can drain the entire cistern in 45 hours when no other pipe is in operation. Initially, when the cistern was empty Pipe A and Pipe C were turned on. After a few Pipe A was turned off and Pipe B was turned on instantly. In all, it took 55 hours to fill the cistern. For how many hours was Pipe B turned on?
The velocity of a fluid in a pipe of diameter D is V. The pipe is connected to another pipe of diameter 2D. Reynolds number in the pipe of diameter D in relation to the pipe of diameter 2D is
A tank has an inlet and outlet pipe. The inlet pipe fills the tank completely in 2 hours when the outlet pipe is plugged. The outlet pipe empties the tank completely in 6 hours when the inlet pipe is pluggeed. If there is a lekage also which is capable of draining out the liquid from the tank at half of the rate of outet pipe,them what is the time taken to fill the emty tank when both the pipes are opened?
Reynolds number of a fluid flowing in a circular pipe is 10000. What will be the Reynolds number when the fluid velocity is decreased by 30% & the pipe diameter is increased by 30% ?
A tank is filled by three pipes with uniform flow. The first two pipes operating simultaneously fill the tank in the same time during which the tank is filled by the third pipe alone. The second pipe fills the tank 5 hours faster than the first pipe and 4 hours slower than the third pipe. The time required by the first pipe is:
A circular pipe of radius 7 cm is used for water flow transmission. This pipe is moulded into another pipe with a square cross-section keeping the length same. (Ignore the thickness of the pipe). Calculate the hydraulic diameter of the moulded pipe. (Take π = 22/7).
A water line is buried underground in dry soil that has an assumed initial temperature of 4.5 degree Celsius. The pipe may have no flow through it for long period of time, yet it will not be drained in order that no freezing occurs, the pipe must be kept at a temperature not lower than 0 degree Celsius. The pipe is to be designed for a 30 hour period at the beginning of which the soil surface temperature suddenly drops to – 17 degree Celsius. Workout the minimum earth covering needed above the water pipe so as to prevent the possibility of freezing during 36 hour cold spell. The soil in which the pipe is buried has the following properties Density = 640 kg/m3 Specific heat = 1843J/kg degree Thermal conductivity = 0.345 W/m degree
Find the appropriate relation for quantity 1 and quantity 2 in the following question: An artificial kund is filled by three pipes with uniform flow. The first two pipes operating simultaneously fill the kund at the same time during which the kund is filled by the third pipe alone. The second pipe fills the kund 5 hours faster than the first pipe and 4 hours slower than the third pipe. Quantity 1: The time required by the first pipe? Quantity 2: Time taken by all three pipes to fill the Kund simultaneously
A swimming pool is filled by three pipes with uniform flow. The first two pipes operating simultaneously fill the pool in the same time during which the pool is filled by the third pipe alone. The second pipe fills the pool 5 hours faster than the first pipe and 4 hours slower than the third pipe. The time required by the first pipe is?