Related Questions

Baffles are provided in a shell and tube heat exchanger to increase the turbulence and velocity of the shell side fluid. Which of the following shaped baffles does not fall in the category of transverse baffle?
A Segmental baffle
B Flat plate extending across the wall
C Disk type baffle
D Helical type baffle
The mixing vat in a factory receives liquid ingredients through six separate value--- labeled R.S.T.U,Y and Z -- each of which has exactly two settings: open and closed.The mixing vat operator must ensure that each valve is set open or closed according to the following conditions: If T is open, both S and Z must be closed, R and Z cannot both be closed at the same time; If Y is closed, Z must also be closed;S and U cannot both be open at the same time. Which of the following, if given to the mixing vat operator as an instruction, would not determine the setting of any other valve ?
A S must be open
B T must be open
C U must be open
A rectangular tank 10 inch by 8 inch by 4 inch is filled with water. If all of the water is to be transferred to cube-shaped tanks, each one 3 inches on a side, how many of these smaller tanks are needed?
A 9
B 12
C 16
D 21
Two tanks are filled to capacity with automobile fuel. The first tank holds 600 gallons more than the second tank. If 100 gallons were to be pumped from each tank, the first tank would then contain 3 times as much fuel as the second tank. What is the total number of gallons of fuel in the two full tanks?
A 1,400
B 1,200
C 1,000
D 900
Two tanks A and B are filled with petrol. Tank A holds 600 liters more than B. If 100 liters of petrol were taken out from each tank, tank A would then contain 3 times as much petrol as tank B. What is the total number of liters of fuel in the two full tanks?
A 1400
B 1200
C 1000
D 900
Two tanks A and B are are filled with petrol. Tank A holds 600 litre more than tank B. If 100 litre of petrol were taken out from each tank A would then contain 3 times as much petrol as tank B. What is the total number of litre of fuel in the two full tanks?
A 1400
B 1200
C 1000
D 900
For storing hazardous chemicals in large storage tanks, the minimum safe distance between the two tanks should range between __________ times the tank diameter.
A 1 to 1.5
B 2.5 to 3.5
C 4 to 5
D 6 to 8
The response curve for a step input signal from a reactor is called C-curve. The variance of C-curve in a 'tanks in series model' comprising of 'm' tanks is equal to
A m
B $$\frac{1}{{\text{m}}}$$
C $$\sqrt {\text{m}} $$
D m2
The main function of baffles provided in a shell and tube heat exchanger is to
A Facilitate the cleaning of outer tube surface
B Enhance turbulence
C Hold the tubes in position
D All of the above
In a shell and tube heat exchanger, baffles are provided on the shell side to
A Improve heat transfer
B Provide support for tubes
C Prevent stagnation of shell side fluid
D All of these

Next steps