Related Questions

একটি পানিপূর্ণ কুয়ার গভীরতা 20m ও ব্যাস 2 m. কুয়াটিকে পানি শূণ্য করার জন্য 5 HP এর একটি পাম্প লাগানো হল। অর্ধেক পানি তোলার পর পাম্পটি নষ্ট হয়ে গেল। বাকি পানি তোলার জন্য একই ক্ষমতা সম্পন্ন আর একটি পাম্প লাগানো হল। প্রথম পাম্প দ্বারা সম্পাদিত কাজের পরিমান নির্ণয় কর।(The depth and diameter of a water filled well are 20 m and 2 m respectively. An engine of 5 HP is attached to pump out the water. The pump was ruined after emptying half of the water. Then another pump of same capacity was attached to pump out rest of the water. Determine the work done by first pump.) 
A 2.54 × 104 J
B 1.44 × 104 J
C 2.34×104 J
D 1.54 × 104 J
E 1.54 ×104 J
Working alone, pump A can empty a pool in 3 hours. Working alone, pump B can empty the same pool in 2 hours. Working together, how many minutes will it take pump A and pump B to empty the pool?
A 72
B 75
C 84
D 96
A centrifugal pump designed to pump water is employed to pump a more viscous oil. In the later case, the pump
A Develops a lower head
B Capacity is reduced
C Requires more power
D All of the above
Liquid gradient over a tray can be minimised by
A Providing a higher skirt clearance or a higher weir
B Decreasing the number of rows of caps through which the liquid flows or by decreasing the velocity of liquid flow past the caps or by reducing the distance along the tray through which the liquid must flow
C Using split flow, radial flow or cascade flow for column diameter large than 4 ft
D All of the above
The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump.
A Electromagnetic
B Reciprocating
C Centrifugal
D Volute
A boat has a crack in its bull which is leaking water into the boat and could pump which can pump the water out in 8 hours . If the boat is 168 km away from the shore and the pump is running what is the minimum speed the boat should run at so that it can reach the shore before sinking?
A 5km./hour
B 6 km/hour
C 7 km/hour
D 8km/hour
Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases.
A NPSH required
B BHP required by the pump
C Head of the liquid pumped
D All of the above
In a moderately sized packed absorption tower, channeling (which is most severe with stacked packings) can be minimised by taking the ratio of tower diameter to packing diameter
A > 4 :1
B > 8:1
Stack heat losses can be minimised by
A Controlling the excess air
B Oxygen enrichment of combustion air
C Using low c.v. fuels
D Maintaining proper draft in the furnace
Which of the following pumps in used to pump sewage solids with liquid sewage without clogging the pump is?
A Centrifugal pump
B Pneumatic ejector
C Reciprocating pump
D None of these

Next steps