Related Questions

Pressure difference between two points in vessels, pipelines or in two different pipelines can be measured by a differential manometer. The pressure difference measured as the mm of water coloumn in case of mercury-water, differential manometer is equal to (where, H = difference in height of mercury column in mm).
A H
B 12.6 H
C 13.6 H
D 14.6 H
A rectangular tank 10 inch by 8 inch by 4 inch is filled with water. If all of the water is to be transferred to cube-shaped tanks, each one 3 inches on a side, how many of these smaller tanks are needed?
A 9
B 12
C 16
D 21
Surge tanks are used
A for storage water
B to increase the velocity in a pipeline
C as overflow valves
D to guard against water hammer
Two tanks are filled to capacity with automobile fuel. The first tank holds 600 gallons more than the second tank. If 100 gallons were to be pumped from each tank, the first tank would then contain 3 times as much fuel as the second tank. What is the total number of gallons of fuel in the two full tanks?
A 1,400
B 1,200
C 1,000
D 900
Two tanks A and B are filled with petrol. Tank A holds 600 liters more than B. If 100 liters of petrol were taken out from each tank, tank A would then contain 3 times as much petrol as tank B. What is the total number of liters of fuel in the two full tanks?
A 1400
B 1200
C 1000
D 900
Two tanks A and B are are filled with petrol. Tank A holds 600 litre more than tank B. If 100 litre of petrol were taken out from each tank A would then contain 3 times as much petrol as tank B. What is the total number of litre of fuel in the two full tanks?
A 1400
B 1200
C 1000
D 900
For storing hazardous chemicals in large storage tanks, the minimum safe distance between the two tanks should range between __________ times the tank diameter.
A 1 to 1.5
B 2.5 to 3.5
C 4 to 5
D 6 to 8
The response curve for a step input signal from a reactor is called C-curve. The variance of C-curve in a 'tanks in series model' comprising of 'm' tanks is equal to
A m
B $$\frac{1}{{\text{m}}}$$
C $$\sqrt {\text{m}} $$
D m2
The testing pressure of storage tanks and pressure vessels designed as per Indian standard codes should be about __________ times.the design pressure.
A 1.5 to 2
B 3 to 4
C 4 to 5
D >5
Disc compensators are provided in large diameter fuel gas carrying pipelines to
A Keep the pipe in proper orientation
B Make the pipe joint leak-proof
C Account for contraction/expansion of pipe due to temperature changes of the surroundings
D Account for the pressure variation side the pipeline

Next steps