Related Questions

An example of unsteady non uniform flow is the flow of liquid under pressure through a
Unsteady uniform flow is represented by flow through a/an
Unsteady non-uniform flow is represented by flow through a/an
গরম বাতাসে পরিপূর্ণ M ভরের একটি বেলুন (থ্রডি সহ) পৃথিবীর দিকে খুব ত্বরণ a তে নেমে আসছে। ঝুড়ি থেকে কি পরিমান m ভর ফেলে দিলে বেলুনটি উপরের দিকে একই খুব ত্বরন a- তে উঠে যাবে ? সকল ক্ষেত্রে বেলুনটির আয়তন একই ছিল বলে ধরে নেওয়া হলো। (g = অভিকর্ষীয় ত্বরন)(A hot air balloon with a bucket is descending towards the earth with a constant acceleration a. The combined mass of the balloon and bucket is M. What mass m from the bucket should be released so that the balloon starts ascending up with the same acceleration a? Consider the volume of the balloon remains constant at all the time. (g=acceleration due to gravity))
For one dimensional flow of an incompressible fluid in unsteady state in x-direction, the continuity equation is given by
Fugacity of a component in an ideal gas mixture is euqal to the partial pressure of that component in the mixture. The fugacity of each component in a stable homogeneous solution at contant pressure and temperature __________ as its mole fraction increases.
একজন ছাত্র পরীক্ষাগারে অভিকর্ষজ ত্বরণের মান 9.88 m/sec2 নির্ণয় করন। অপর দিকে যখন সে 0.01 kg ভরের কোনো বাটখারাকে স্প্রিং নিক্তিতে ঝুলিয়ে দিল তখন 0.0980 N বল দেখাচ্ছে। তার পরীক্ষা অভিকর্ষজ ত্বরণের ত্রুটি নির্ণয় কর।(A student measured the value of acceleration due to gravity in the laboratory as 9.88 m/sec2. On the other hand, when he hanged a mass of 0.01 kg in the spring balance, then he found 0.0980 N force. Calculate the percentage of error in the measured value of the acceleration due to gravity.)
The acceleration of a particle at any instant has two components i.e. radial component and tangential component. These two components will be
Relative volatility varies with the concentration of component for an ideal solution. The relative volatity of a binary mixture may be defined as the ratio of vapor pressure of component 'A' to that of component 'B', when
Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid ilow control. It is caused due to