Related Questions

In the carbonation of a soft drink, the total quantity of carbon dioxide required is the equivalent of 3 volumes of gas to one volume of water at 0⁰C and atmospheric pressure. Calculate (i) the mass fraction and (ii) the mole fraction of the CO2 in the drink, ignoring all components other than CO2 and water. Basis 1 m3 of water = 1000 kg Volume of carbon dioxide added = 3 m3 From the gas equation, pV = nRT 1 x 3 = n x 0.08206 x 273 n = 0.134 mole. Molecular weight of carbon dioxide = 44 And so weight of carbon dioxide added = 0.134 x 44 = 5.9 kg
Fertiliser value of a nitrogeneous fertiliser is expressed in terms of its __________ content.
Evaporation of n-propyl alcohol into carbon dioxide for the same geometrical arrangement of tube diameter (d) of 38 mm when the carbon dioxide flows at a maximum velocity (ug) of 10 m/s at 300 K and 1 atm. Properties of dilute mixtures of propyl alcohol in carbon dioxide at 300 K and 1 atm are: Molecular weight (M) = 44 gm/mole, density (ρ) = 1.8 kg/m3 , Viscosity (μ) = 1.49×10-5 kg/m.s, diffusivity (DAB) = 7.6×10-6 m2 /s and universal gas constant (R) = 8.314 J/mole.K. Estimate the Reynolds number. Nu = 0.453Re0.568 Pr0.36, where 10 < Re (= ρug d/μ)<106 and 0.7 < Pr < 500
Solution-1 containing 40% nitric acid and 20% carbon dioxide at the rate F combines with Solution-2 containing 30% nitric acid and 40% carbon dioxide at the rate D, the product formed contains 30% nitric acid and 20% carbon dioxide at the rate P, If P = xF what is x?
Solution-1 containing 40% acetic acid and 20% carbon dioxide at the rate F combines with Solution-2 containing 20% acetic acid and 40% carbon dioxide at the rate D, the product formed contains 30% acetic acid at the rate P, what is the percentage of carbon dioxide in product?
Steam reforming of naphtha is a source of hydrogen production for nitrogeneous fertiliser industry. What is the usual ratio of steam to carbon maintained in the process of steam reforming of naphtha?
Hydrogen gas is not produced commercially (for nitrogeneous fertiliser manufacture) by
Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an __________ bed gasifier.
Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogeneous fertiliser?
N2 content in a urea sample was found to be only 42%. What is the actual urea content of the sample? (molecular weight of urea = 60)