Related Questions

Small furnace draught is accurately measured by an inclined tube manometer, in which the manometric liquid used most commonly is
A Water
B Carbon tetrachloride
C Paraffin
D Ethylene glycol
Which of the following is an undesirable property of a manometric liquid?
A Non-sticky & non-corrosive nature
B High vapour pressure
C Low viscosity & surface tension
D Low co-efficient of thermal expansion
Use of water as a manometric liquid suffers from the disadvantage of its
A Low vapour pressure
B Corrosive nature
C High vapour pressure
D High boiling point
In a compound steam engine, the first stage of expansion is carried out in a high pressure cylinder whereas the last expansion is completed in low pressure cylinder. The diameter of high pressure cylinder is _________ the low pressure cylinder.
A Equal to
B Less than
C More than
D None of these
Manometric head, in case of a centrifugal pump, is equal to
A Suction lift + Loss of head in suction pipe due to friction + Delivery lift + Loss of head in delivery pipe due to friction + Velocity head in the delivery pipe
B Work-done per kN of water Losses within the impeller
C Energy per kN at outlet of impeller Energy per kN at inlet of impeller
D All of the above
A company produces five types of shirts -- A,B,C,D and E-using cloth of three qualities -- high, medium and low , using dyes of three qualities-- high, medium and low. One shirt requires 1.5 m of cloth .The following table gives respectively : The number of shirts (of each category) produced, in thousands. The percentage distribution of cloth quality in each type of shirt, and The percentage distribution of dye quality in each type of shirt. What is the ratio of low quality dye used for C-type shirts to that used for D-type shirts ?
A 2:3
B 1:2
C 2:1
D 3:2
A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid.
A Subcooled
B Saturated
C Non-solidifiable
D None of these
A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall acts at a distance __________ from the liquid surface.
A $$\frac{{\text{H}}}{3}$$
B $$\frac{{\text{H}}}{2}$$
C $$\frac{{2{\text{H}}}}{3}$$
D $$\frac{{3{\text{H}}}}{4}$$
Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, in the direction of flow of the liquid, is known as
A Lift
B Drag
C Stagnation pressure
D Bulk modulus
A company produces five types of shirts -- A,B,C,D and E-using cloth of three qualities -- high, medium and low , using dyes of three qualities-- high, medium and low. One shirt requires 1.5 m of cloth .The following table gives respectively : The number of shirts (of each category) produced, in thousands. The percentage distribution of cloth quality in each type of shirt, and The percentage distribution of dye quality in each type of shirt. How many meters of low-quality cloth is consumed?
A 40,00 m
B 60,000 m
C 46,500 m
D 22,500 m

Next steps