Related Questions

Often earing defects are found during deep drawing operation, because the
A surface finish of the sheet is poor
B sheet material has been given substantial spring back
C starting sheet has planer anisotropy due to its texture
D starting sheet has normal anisotropy due to its texture
Two men and women are entrusted with a task. The second man needs three hours more to cope up with the job than the second man and the woman would need working together. The first man, working alone, would need as much time as second man and the woman working together. The first man working alone, would spend eight hours less than the double period of the time second man would spend working alone. How much time would the two men and the women need to complete the task if they all asked together?
A 1 hour
B 2 hours
C 3 hours
D 4 hours
E 5 hours
For hardening alloy steels and high speed steels, they are heated to
A 1100 to 1300°C
B 1300 to 1500°C
C 500 to 600°C
D 700 to 900°C
'Killed steels' are those steels
A Which are destroyed by burning
B Which after their destruction are recycled to produce fresh steel
C Which are deoxidized in the ladle with silicon and aluminium
D In which carbon is completely burnt
Steels with high carbon equivalent have poor weldability, because in these steels during welding
A Carbon and other alloying elements get oxidised from the weld pool
B Excessive ferrite forms in the heat affected zone leading to poor toughness of the weld
C Martensite forms in the heat affected zone leading to poor toughness/ductility of the weld
D Segregation of carbon and other element occurs in the weld pool leading to poor properties of the weld
Ferric stainless steels compared to austenitic stainless steels
A Have lower corrosion resistance
B Are harder to fabricate
C Are less ductile and hence less suitable for cold pressing
D All of the above
Of the 45 families in a locality, 25 families have working mothers and 10 families have retired individuals as members to look after the children at home. Of the families, 8 have both working mothers and retired individuals as members. How many of the families have working mothers but no retired individuals as members?
A 2
B 18
C 17
Which of the following when used in ordinary low carbon steels, makes the metal ductile and of good bending qualities?
A Sulphur
B Phosphorus
C Manganese
D Silicon
In high speed steels, manganese is used to tougher the metal and to increase its
A Yield point
B Critical temperature
C Melting point
D Hardness
Two streams of liquid metal which are not hot enough to fuse properly result into a casting defect known as
A Cold shut
B Swell
C Sand wash
D Scab

Next steps