Related Questions

If the modulus of elasticity for a given material is twice its modulus of rigidity, then bulk modulus is equal to
A 2C
B 3C
C $$\frac{{2{\text{C}}}}{3}$$
D $$\frac{{3{\text{C}}}}{2}$$
Which of the following relationships is correct for relating the three elastic constants of an isotropic elastic material (where, E = Young's modulus, G = Modulus of rigidity or shear modulus v = Poisson's ratio)?
A E = 2G (1 + v)
B E = G (1 + v)
C $${\text{E}} = \frac{{{\text{G}}\left( {1 + {\text{v}}} \right)}}{2}$$
D E = 2G (1 + 2v)
The relation between Young's modulus (E), shear modulus (C) and bulk modulus (K) is given by
A $${\text{E}} = \frac{{3{\text{KC}}}}{{3{\text{K}} + {\text{C}}}}$$
B $${\text{E}} = \frac{{6{\text{KC}}}}{{3{\text{K}} + {\text{C}}}}$$
C $${\text{E}} = \frac{{9{\text{KC}}}}{{3{\text{K}} + {\text{C}}}}$$
D $${\text{E}} = \frac{{12{\text{KC}}}}{{3{\text{K}} + {\text{C}}}}$$
The ratio of shear modulus to the modulus of elasticity for a poisson's ratio of 0.4 will be
A 14/5
B 7/5
C 5/14
D 5/7
The shear modulus of most materials with respect to the modulus of elasticity is
A Equal to half
B Less than half
C More than half
D None of these
When a rectangular bar of length $$l$$, breadth b and thickness t is subjected to an axial pull of P, then linear strain ($$\varepsilon $$) is given by (where E = Modulus of elasticity)
A $$\varepsilon = \frac{{\text{P}}}{{{\text{btE}}}}$$
B $$\varepsilon = \frac{{{\text{btE}}}}{{\text{P}}}$$
C $$\varepsilon = \frac{{{\text{bt}}}}{{{\text{PE}}}}$$
D $$\varepsilon = \frac{{{\text{PE}}}}{{{\text{bt}}}}$$
Assume that the price of product Y decreases by 5% and the quantity supplied decreases by 2%. The coefficient of price elasticity of supply for product Y is:
A Negative and therefore Y is an inferior product.
B Less than one and therefore supply is-inelastic
C More than-one and therefore supply is elastic,
D Negative & supply curve is download slopping.
Ponchon Savarit method is based on the use of enthalpy concentration diagram, which contains the bubble point curve (saturated liquid curve), dew point curve (saturated vapour curve) and equilibrium tie lines. As compared to McCabe-Thiele's method, this method
A Is more accurate in finding the number of equilibrium stages
B Accounts for the enthalpy changes in the process
C Facilitates direct calculation of heat load on reboiler & condenser from, the diagram used in this method
D All of the above
একটি ইস্পাতের তারের উপাদানের ইয়ং গুণাঙ্ক Y। যদি তারের ব্যাস দ্বিগুণ করা হয় তাহলে পরিবর্তিত ইয়ং গুণাঙ্ক কত হবে? (Young's modulus of the material of a steel wire is Y. If the diameter of the wire is doubled, what will be the changed Young's modulus?)
A পূর্বের সমান (the same as before)
B পূর্বের অর্ধেক (half the previous value)
C পূর্বের দ্বিগুণ (twice the previous value)
D পূর্বের চারগুণ (four times the previous value)
STP-তে একটি আদর্শ গ্যাসকে প্রথমে তার প্রাথমিক আয়তনের এক-তৃতীয়াংশে সংকুচিত করা হয়, এবং তারপর প্রসারিত হতে দেওয়া হয় যতক্ষণ না তার চাপ প্রাথমিক চাপের অর্ধেক হয়। উভয় প্রক্রিয়ায় গ্যাসের তাপমাত্রা স্থির থাকে। যদি গ্যাসের প্রাথমিক অভ্যন্তরীণ শক্তি । হয়ে থাকে তাহলে এর চূড়ান্ত অভ্যন্তরীণ শক্তি কত? (An ideal gas at STP is first compressed to one-third of its initial volume and then allowed to expand until its pressure is half the initial pressure. The temperature of the gas remains constant during both the processes. If the initial internal energy of the gas is U, what is its final internal energy?)
A U/3
B U/2
C U
D 2U/3

Next steps