Related Questions

If the flame of a miner's safety lamp in the upper layers of the sewer forms an explosive, the sewer certainly contains
A Hydrogen sulphide
B Carbon dioxide
C Methane
D Oxygen
A tank is fitted with 8 pipes, some of them that fill the tank and others that are waste pipe meant to those that empty the tank can empty it in 6 hours. If all the pipes are kept open when the tank is full, it will take exactly 6 hours for the tank to empty. How many of these are these are fill pipes?
A 2
B 4
C 6
D 5
In R.C. sewer pipes, the percentage longitudinal reinforcement to the cross-sectional area of concrete is kept
A 10.0
B 5.0
C 2.0
D 0.25
Sewer pipes need be checked for
A Minimum flow
B Maximum flow
C Both A and B
D None of these
The porosity of sediments in sewer pipes, is usually taken as
A 0.010
B 0.011
C 0.012
D 0.013
The sewer pipes
A Carry sewage as gravity conduits
B Are designed for generating self-cleansing velocities at different discharge
C Should resist the wear and tear caused due to abrasion
D All the above
Which one of the following tests is used for testing sewer pipes?
A Water test
B Ball test
C Mirror test
D All of these
Lead is poured into the joint between two pipes. These pipes may be made of
A Cast iron
B Vitrified clay
C Asbestos cement
D Concrete
Two pipes A and B can fill a tank in 20 and 30 minutes respectively . If both the pipes are used together , then how long will it take to fill the tank ?
A 12 min
B 15 min
C 25 min
D 50 min
Three pipes can independently fill a water tank in 10,12 and 15 hours. How many hours will it take for all three pipes opened together to fill half of the tank?
A 6
B 5
C 4
D 2

Next steps