Related Questions

Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese.
A 1.5-2
B 3.5-4.5
C 7-9
D 12-14
In high speed steels, manganese is used to tougher the metal and to increase its
A Yield point
B Critical temperature
C Melting point
D Hardness
For hardening alloy steels and high speed steels, they are heated to
A 1100 to 1300°C
B 1300 to 1500°C
C 500 to 600°C
D 700 to 900°C
'Killed steels' are those steels
A Which are destroyed by burning
B Which after their destruction are recycled to produce fresh steel
C Which are deoxidized in the ladle with silicon and aluminium
D In which carbon is completely burnt
Steels with high carbon equivalent have poor weldability, because in these steels during welding
A Carbon and other alloying elements get oxidised from the weld pool
B Excessive ferrite forms in the heat affected zone leading to poor toughness of the weld
C Martensite forms in the heat affected zone leading to poor toughness/ductility of the weld
D Segregation of carbon and other element occurs in the weld pool leading to poor properties of the weld
Ferric stainless steels compared to austenitic stainless steels
A Have lower corrosion resistance
B Are harder to fabricate
C Are less ductile and hence less suitable for cold pressing
D All of the above
Manganese is added in low carbon steel to
A Make the steel tougher and harder
B Raise the yield point
C Make the steel ductile and of good bending qualities
D All of the above
Presence of iron and manganese in water causes
A Reduction in its dissolved oxygen content
B Discoloration of bathroom fixtures
C Temporary hardness
D None of these
The system in which high tensile alloy steel bars (silica manganese steel) are used as pre-stressing tendons, is known as
A Freyssinet system
B Magnel-Blaton system
C C.C.L. standard system
D Lee-McCall system
Manganese in steel affects its
A Ductility
B Tensile strength
C Hardness
D None of these

Next steps