Related Questions

Vanadium in high speed steels
A Promotes decarburisation
B Provides high hot hardness
C Forms very hard carbides and thus increases wear resistance
D Promotes retention of austenite
A steel mill produces 180 tons of steel per month Raw materials cost for each ton of production is Tk. 1200. Other expenses of that mill are Tk. 90,000 in each month what should be the selling price of each ton of steel in order to make 10% profit?
A 1870
B 1845
C 1842
D 18145
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংয়ের গুণাঙ্ক তামার ইয়ংয়ের গুণাঙ্কের দুইগুণ হলে লোহার দৈর্ঘ্য বৃদ্ধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? ( A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young's modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1 :8
B 1 : 6
C 1 : 4
D 1 : 2
The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is _________ cutting speed for drilling mild steel with high speed steel drills.
A Equal to
B Less than
C More than
D None of these
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংকের গুণাস্ক তামার ইয়ংকের গুণাস্কের দুইগুন হলে লোহার দৈর্ঘ্য বৃধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? (A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young‘s modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1:8
B 1:6
C 1:4
D 1:2
Steel balls for ball bearings are generally made of __________ steel.
A Cast
B Stainless
C Free carbon
D Carbon chrome
The system in which high tensile alloy steel bars (silica manganese steel) are used as pre-stressing tendons, is known as
A Freyssinet system
B Magnel-Blaton system
C C.C.L. standard system
D Lee-McCall system
The steel used in steel cored conductors is usually
A Alloy steel
B Stainless steel
C Mild steel
D High speed steel
For accurate work, the steel band should always be used in preference to chain because the steel band
A is lighter than chain
B is easier to handle
C is practically inextensible and is not liable to kinks when in use
D can be easily repaired in the field
Steel rods are normally used for concrete reinforcement because concrete and steel have almost equal
A Tensile strength
B Compressive strength
C Young's modulus
D Thermal co-efficient of expansion

Next steps