Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Consider the following statements regarding types of supports and beams: 1. When both supports of beams are roller supports, the beam is known as simply supported beam. 2. A beam with one end fixed and the other end free is known as fixed beam. 3. A beam with both ends fixed is known as cantilever beam. 4. A beam with one end fixed and the other simply supported is known as propped cantilever. Which of the above statements is/are correct ?
In which of the following cases, there exists the situation of Pure Bending in some part of the beam or along the entire beam? i) A simply supported beam subjected to two equally spaced downward concentrated loads ii) A simply supported beam subjected to two equally spaced opposite moments iii) A cantilever beam subjected to clockwise moment at free end iv) An overhanging beam with both side overhangs subjected to different concentrated loads at both the free ends
A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be __________ as compared to beam 'A'.
If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a
For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to
A simply supported beam shall be deemed to be a deep beam when the ratio of effective span to overall depth, is less than:
A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be
Consider the following statements with regards to the shear force diagram for the beam ABCD: 1. The beam ABCD is an overhanging beam having supports at A and D only. 2. The beam carries a point load of 20 kN at C. 3. The beam carries a concentrated load of 10 kN at the end B. 4. The beam is an overhanging beam having supports at C and D only. 5. The beam carries a uniformly distributed load of 70 kN over the left hand portion AC only. Which of the above statements are correct?
A simply supported beam 'A' of length ‘l’, breadth ‘b’ and depth ‘d’ carries a central load ‘W’. Another beam 'B' of the same dimensions carries a central load equal to 2W. The deflection of beam 'B' will be __________ as that of beam 'A'.
A simply supported beam of span 9 m is subjected to two-point loads, each of 10 kN acting at, 1/3 of the span as shown in the figure. If the self-weight of the beam is neglected, then how much prestressing force is required to counter-balance the external loads if θ = 30°?