The maximum bending moment for a simply supported beam with a uniformly distributed load w/unit length, is

The maximum bending moment for a simply supported beam with a uniformly distributed load w/unit length, is Correct Answer $$\frac{{{\text{w}}{{\text{L}}^2}}}{8}$$

Bissoy MCQ

Related Questions

The natural frequency of free transverse vibrations due to uniformly distributed load acting over a simply supported shaft is (where $$\delta {\text{S}}$$ = Static deflection of simply supported shaft due to uniformly distributed load)
The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is
A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is
The bending moment in the center of a simply supported beam carrying a uniformly distributed load of w per unit length is
The bending moment diagram for a simply supported beam carrying a uniformly distributed load of ‘w’ per unit length, will be
When a uniformly distributed load, longer than the span of the girder, moves from left to right, then the maximum bending moment at mid section of span occurs when the uniformly distributed load occupies
A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be
A simply supported beam carries varying load from zero at one end and w at the other end. If the length of the beam is a, the maximum bending moment will be
A simply supported beam 'A' of length ‘l’, breadth ‘b’ and depth ‘d’ carries a central load ‘W’. Another beam 'B' of the same dimensions carries a central load equal to 2W. The deflection of beam 'B' will be __________ as that of beam 'A'.
There are two beams of equal length L and a load P is acting on centre of both beams. One of them is simply supported at both ends while the other one is fixed at both ends. Deflection of centre of simply supported beam will be __________ times that of defection of centre of fixed beam.