Related Questions

In backhand welding, the angle between the welding rod and the work is ________ as compared to forehand welding.
A Same
B Less
C More
D None of these
In forehand welding, the angle between the welding torch and the work is ________ as compared to backhand welding.
A Same
B Less
C More
D None of these
If the flame of the welding torch is directed towards the progress of welding, then what will you call the welding technique?
A Forehand welding
B Flux cored ARC welding
C Electro slag welding
D Pulsed spray welding
In DC arc welding, if leads are arranged in work as Negative pole of the welding arc and electrode as Positive pole of the welding arc, the arrangement is known as
A Fusion
B Reverse polarity
C Forward welding
D Direct polarity
For gas welding, the pressure desired at the welding torch for acetylene is
A 7 to 103 kN/m2
B 70 to 280 kN/m2
C 280 to 560 kN/m2
D 560 to 840 kN/m2
For gas welding, the pressure desired at the welding torch for oxygen is
A 7 to 103 kN/m2
B 70 to 280 kN/m2
C 280 to 560 kN/m2
D 560 to 840 kN/m2
In electric resistance welding, voltage required for heating is
A 1 to 5 volts
B 6 to 10 volts
C 11 to 20 volts
D 50 to 100 volts
Material of construction of the electrode used in the electric resistance welding is
A Stainless steel
B Graphite
C Copper
D Steel
The current in electric resistance welding can be regulated by
A Varying the input supply
B Changing the primary turns of the transformer
C Changing the secondary turns of the transformer
D Any one of the above
If A varies directly proportional to C and B also varies directly proportional to C, which one of the following is not correct ?
A $$\left( {A + B} \right)\alpha \,C$$
B $$\left( {A - B} \right)\alpha \,\frac{1}{C}$$
C $$\sqrt {AB} \,\alpha \,C$$
D $$\frac{A}{B} = {\text{constant}}$$

Next steps