Related Questions

Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, in the direction of flow of the liquid, is known as
A Lift
B Drag
C Stagnation pressure
D Bulk modulus
A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall acts at a distance __________ from the liquid surface.
A $$\frac{{\text{H}}}{3}$$
B $$\frac{{\text{H}}}{2}$$
C $$\frac{{2{\text{H}}}}{3}$$
D $$\frac{{3{\text{H}}}}{4}$$
A plate with an elliptical hole in the centre, with semi-major axis (a) perpendicular to the direction of loading and semi-minor axis (b) along the direction of loading, is subjected to a pull P. The maximum stress induced at the edge of the hole is equal to (where $$\sigma $$ = Stress for a plate with no hole i.e. nominal stress)
A $$\sigma \left( {1 + \frac{{\text{b}}}{{2{\text{a}}}}} \right)$$
B $$\sigma \left( {1 + \frac{{2{\text{a}}}}{{\text{b}}}} \right)$$
C $$\sigma \left( {1 + \frac{{\text{b}}}{{3{\text{a}}}}} \right)$$
D $$\sigma \left( {1 + \frac{{3{\text{a}}}}{{\text{b}}}} \right)$$
In a liquid-liquid heat exchanger, for the same process temperature, the ratio of the LMTD in parallel flow to the LMTD in counter flow is always
A [

A.

B. > 1

B 1
C ∞
পাত-দূরত্ব d এবং ধারকত্ব C. এমন একটি সমান্তরাল পাত ধারকের পাত দুটির মাঝখানে d/2 পুরুত্ববিশিষ্ট একটি ধাতব পাত স্থাপন করা হলো। নতুন ধারকত্ব কত হবে? (A metal plate of thickness d/2 is inserted between the plates of a parallel plate capacitor with plate separation d and capacitance C. What is the new capacitance?)
A C/d
B C/2
C 4Cd
D 2c
When a body is immersed wholly or partially in a liquid, it is lifted up by a force equal to the weight of liquid displaced by the body. This statement is called
A Pascal’s law
B Archimedes’s principle
C Principle of flotation
D Bernoulli’s theorem
Applying a pressure drop across a capillary results in a volumetric flow rate 'Q' under laminar flow conditions. The flow rate for the same pressure drop, in a capillary of the same length but half the radius is
A $$\frac{{\text{Q}}}{2}$$
B $$\frac{{\text{Q}}}{4}$$
C $$\frac{{\text{Q}}}{8}$$
D $$\frac{{\text{Q}}}{{16}}$$
A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid.
A Subcooled
B Saturated
C Non-solidifiable
D None of these
The point in the immersed body through which the resultant pressure of the liquid may be taken to act is known as
A center of gravity
B center of buoyancy
C center of pressure
D metacentre
Resultant pressure of the liquid in the case of an immersed body acts through
A center of gravity
B center of pressure
C metacentre
D center of buoyancy

Next steps