Related Questions

Which of the following pump is preferred for flood control and irrigation applications?
A Reciprocating pump
B Axial flow pump
C Mixed flow pump
D Centrifugal pump
একটি পানিপূর্ণ কুয়ার গভীরতা 20m ও ব্যাস 2 m. কুয়াটিকে পানি শূণ্য করার জন্য 5 HP এর একটি পাম্প লাগানো হল। অর্ধেক পানি তোলার পর পাম্পটি নষ্ট হয়ে গেল। বাকি পানি তোলার জন্য একই ক্ষমতা সম্পন্ন আর একটি পাম্প লাগানো হল। প্রথম পাম্প দ্বারা সম্পাদিত কাজের পরিমান নির্ণয় কর।(The depth and diameter of a water filled well are 20 m and 2 m respectively. An engine of 5 HP is attached to pump out the water. The pump was ruined after emptying half of the water. Then another pump of same capacity was attached to pump out rest of the water. Determine the work done by first pump.) 
A 2.54 × 104 J
B 1.44 × 104 J
C 2.34×104 J
D 1.54 × 104 J
E 1.54 ×104 J
A company produces five types of shirts -- A,B,C,D and E-using cloth of three qualities -- high, medium and low , using dyes of three qualities-- high, medium and low. One shirt requires 1.5 m of cloth .The following table gives respectively : The number of shirts (of each category) produced, in thousands. The percentage distribution of cloth quality in each type of shirt, and The percentage distribution of dye quality in each type of shirt. What is the ratio of low quality dye used for C-type shirts to that used for D-type shirts ?
A 2:3
B 1:2
C 2:1
D 3:2
In a compound steam engine, the first stage of expansion is carried out in a high pressure cylinder whereas the last expansion is completed in low pressure cylinder. The diameter of high pressure cylinder is _________ the low pressure cylinder.
A Equal to
B Less than
C More than
D None of these
Working alone, pump A can empty a pool in 3 hours. Working alone, pump B can empty the same pool in 2 hours. Working together, how many minutes will it take pump A and pump B to empty the pool?
A 72
B 75
C 84
D 96
A centrifugal pump designed to pump water is employed to pump a more viscous oil. In the later case, the pump
A Develops a lower head
B Capacity is reduced
C Requires more power
D All of the above
For small discharge at high pressure, following pump is preferred
A Centrifugal
B Axial flow
C Mixed flow
D Reciprocating
A company produces five types of shirts -- A,B,C,D and E-using cloth of three qualities -- high, medium and low , using dyes of three qualities-- high, medium and low. One shirt requires 1.5 m of cloth .The following table gives respectively : The number of shirts (of each category) produced, in thousands. The percentage distribution of cloth quality in each type of shirt, and The percentage distribution of dye quality in each type of shirt. How many metres of high quality cloth is consumed by A-type shirts?
A 30,00 m
B 24,00 m
C 112,000 m
D 8,00 m
A company produces five types of shirts -- A,B,C,D and E-using cloth of three qualities -- high, medium and low , using dyes of three qualities-- high, medium and low. One shirt requires 1.5 m of cloth .The following table gives respectively : The number of shirts (of each category) produced, in thousands. The percentage distribution of cloth quality in each type of shirt, and The percentage distribution of dye quality in each type of shirt. How many meters of low-quality cloth is consumed?
A 40,00 m
B 60,000 m
C 46,500 m
D 22,500 m
Which pump is more suitable for an application where very high pressure is required to be developed at moderate discharge?
A Reciprocating pump
B Centrifugal pump
C Turbine
D None of the mentioned

Next steps