Related Questions

A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall acts at a distance __________ from the liquid surface.
A $$\frac{{\text{H}}}{3}$$
B $$\frac{{\text{H}}}{2}$$
C $$\frac{{2{\text{H}}}}{3}$$
D $$\frac{{3{\text{H}}}}{4}$$
A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. Which of the following statement is correct?
A The pressure on the wall at the liquid level is minimum
B The pressure on the bottom of the wall is maximum
C The pressure on the wall at the liquid level is zero, and on the bottom of the wall is maximum
D The pressure on the bottom of the wall is zero
A ladder is resting against a vertical wall and its bottom is 2.5 m away from the wall. If it slips 0.8 m down the wall, then its bottom will move away from the wall by 1.4 m. What is the length of the ladder?
A 6.2 m
B 6.5 m
C 6.8 m
D \7.5 m
To have pressure wholly compressive under the base of a retaining wall of width b, the resultant of the weight of the wall and the pressure exerted by the retained, earth should have eccentricity not more than
A $$\frac{{\text{b}}}{3}$$
B $$\frac{{\text{b}}}{4}$$
C $$\frac{{\text{b}}}{5}$$
D $$\frac{{\text{b}}}{6}$$
Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, in the direction of flow of the liquid, is known as
A Lift
B Drag
C Stagnation pressure
D Bulk modulus
When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as
A Steady flow
B Turbulent flow
C Vortex flow
D Uniform flow
A key is subjected to side pressure as well at shearing forces. These pressures are called
A Bearing stresses
B Fatigue stresses
C Crushing stresses
D Resultant stresses
Two forces of magnitude 3m and 2m respectively have a resultant R. if the first force is doubled, the magnitude of the resultant is doubled.Find the angle betuween forces?
A 90°
B 120°
C 135°
D 145°
3N ও 2N মানের দুইটি বলের লদ্ধি R । প্রথম বলের মান দ্বিগুণ করলে লদ্ধির মানও দ্বিগুণ হয়। বলদ্বয়ের মধ্যবর্তী কোণের মান হবে- (The resultant of two forces 3N and 2N is R. If the first force is doubled then the resultant is also doubled. The angle between the forces is-)
A 30°
B 45°
C 65°
D 120°
The resultant of two forces P and Q is R. If Q is doubled, the new resultant is perpendicular to P. Then,
A P = R
B Q = R
C P = Q
D None of the above is correct

Next steps