Related Questions

A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be __________ as compared to beam 'A'.
A One-fourth
B One-half
C Double
D Four times
A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is
A 0.207
B 0.307
C 0.407
D 0.508
The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is
A $$\frac{5}{8}$$
B $$\frac{8}{5}$$
C $$\frac{5}{4}$$
D $$\frac{4}{5}$$
The rectangular beam 'A' has length ‘l’, width ‘b’ and depth ‘d’. Another beam 'B' has the same length and depth but width is double that of 'A'. The elastic strength of beam 'B' will be _________ as compared to beam ‘A’.
A Same
B Double
C Four times
D Six times
The rectangular beam 'A ' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.
A Same
B One-half
C One-fourth
D One-eighth
The rectangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and width but depth is double that of 'A'. The elastic strength of beam B will be __________ as compared to beam A.
A Same
B Double
C Four times
D Six times
A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be
A $$\frac{2}{3}$$
B $$\frac{3}{2}$$
C $$\frac{5}{8}$$
D $$\frac{8}{5}$$
A simply supported beam carries varying load from zero at one end and w at the other end. If the length of the beam is a, the maximum bending moment will be
A $$\frac{{{\text{wa}}}}{{27}}$$
B $$\frac{{{\text{w}}{{\text{a}}^2}}}{{27}}$$
C $$\frac{{{{\text{w}}^2}{\text{a}}}}{{\sqrt {27} }}$$
D $$\frac{{{\text{w}}{{\text{a}}^2}}}{{9\sqrt 3 }}$$
For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to
A 10
B 15
C 20
D 25
The maximum bending moment of a simply supported beam of span $$l$$ and carrying a point load W at the center of beam, is
A $$\frac{{{\text{W}}l}}{4}$$
B $$\frac{{{\text{W}}l}}{2}$$
C $${\text{W}}l$$
D $$\frac{{{\text{W}}{l^2}}}{4}$$

Next steps