Which of the following metal is used in making electrical resistance wire for electric furnaces and heating elements?

Which of the following metal is used in making electrical resistance wire for electric furnaces and heating elements? Correct Answer Nichrome

Chromium is a powerful alloying element in steel. Cr presents in certain structural steels in small amounts.
It is primarily used to increase hardenability of steel and increase the corrosion resistance as well as the yield strength of the steel material.
For that reason often occurs in combination with nickel and copper. Stainless steels may contain in excess of 12% chromium.
Bissoy MCQ

Related Questions

A telephone switchboard 100 pair cable can be made up with either enameled wire or tinned wire. There will be 400 soldered connections. The cost of soldering a connection on the enameled wire will be P 1.65 on the tinned wire, it will be P 1.15. A 100- pair cable made up with enameled wire cost P 0.55 per linear foot and those made up of tinned wire cost P 0.75 per linear foot. Determine the length of cable run in feet so that the cost of each installation would be the same.
In electric arc furnaces, the metal loss is very less due to electrical heating.
Strain gage uses an electrical conductor wire, which when elastically stretched increases in length and reduces in diameter. Both these dimensional changes result in __________ in the electrical resistance of the wire.
An alloy used in making heating elements for electric heating device is
Some pairs of devices and associated energy changes are given below.
1. Electric generator ⟺ Mechanical to electrical
2. Electric motor ⟺ Electrical to mechanical
3. Diesel engine ⟺ Light to electrical
4. Solar cell ⟺ Chemical to mechanical
Which of the above pair/s is/are correctly matched?
High resistance electrical heating elements/wire are not made of
Crucible furnaces are economical for melting metal, but heat loss is the major problem in the crucible furnaces.
Let us consider a copper wire having radius r and length l. Let its resistance be R. If the radius of another copper wire is 2r and the length is $$\frac{l}{2}$$, then the resistance of this wire will be
Two metallic wires made from copper have same length but the radius of wire 1 is half of that of wire 2. The resistance of wire 1 is R. If both the wires are joined together in series, the total resistance becomes
Two metallic wires made from copper have same length but the radius of wire 1 is half of that of wire 2. The resistance of wire 1 is R. If both the wires are joined together in series, the total resistance becomes