Related Questions

The connecting rod bolts are tightened up so that tightening stress
A Is just sufficient to hold parts together
B Approaches yield point
C Is 50% of yield point
D Is about yield point divided by safety factor
Machine A produces bolts at a uniform rate of 120 every 40 seconds and Machine B produces bolts at a uniform rate of 100 every 20 seconds. If the two machines run simultaneously , how many seconds will it take for them to produce a total of 200 bolts.
A 22
B 25
C 28
D 32
Machine A produces bolts at a uniform rate of 120 every 40 seconds, and Machine B produces bolts at a uniform rate of 100 every 20 seconds. If the two machines run simultaneously, how many seconds will it take for them to produce total of 200 bolts?
A 22
B 25
C 28
D 32
When the belt is stationary, it is subjected to some tension known as initial tension. The value of this tension is equal to the
A tension in the tight side of the belt
B tension in the slack side of the belt
C sum of the tensions on the tight side and slack side of the belt
D average tension of the tight side and slack side of the belt
A rod is enclosed centrally in a tube and the assembly is tightened by rigid washers. If the assembly is subjected to a compressive load, then
A Rod is under compression
B Tube is under compression
C Both rod and tube are under compression
D Tube is under tension and rod is under compression
A connecting rod subjected to an axial load may buckle with
A X-axis as neutral axis
B Y-axis as neutral axis
C X-axis or Y-axis as neutral axis
D Z-axis
The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than
A 18 bar diameters
B 24 bar diameters
C 30 bar diameters
D 36 bar diameters
L is older than M and taller than N. O is younger than P, older than N and shorter than Q. R is older than S, younger than N, shorter than S and taller than Q. S is older than L, M, O, P, Q, R and S is necessarily false?
A O is the shortest of the group.
B N is the second tallest of the group.
C L is the tallest of the group.
D Q is the third oldest of the group.
A number is greater than 3 but less than 8. Also, it is greater than 6 but less than 10. The number is -
A 8
B 5
C 6
D 7
The product P of two prime numbers is between 9 and 55. If one of the prime numbers is greater than 2 but less than 6 and the other is greater than 13 but less than 25, then P =
A 15
B 33
C 34
D 51

Next steps