Related Questions

For standard coarse threads of nut, the threads will be as strong in failure by shear as the bolt in tension, if the height of nut (h) is approximately
A 0.4 times
B 0.6 times
C 0.7 times
D 0.8 times
If threads on a bolt are left hand, threads on nut will be
A Right hand with same pitch
B Left hand with same pitch
C Could be left or right hand
D Right hand with fine pitch
When screw threads are to be used in a situation where power is being transmitted in one direction only, then the screw threads suitable for this will be
A Knuckle threads
B Square threads
C Acme threads
D Buttress threads
When a bolt and nut is made of mild steel, then the effective height of nut is made equal to (where d = Nominal diameter of bolt)
A 0.5 d
B 0.75 d
C d
D 1.25 d
If shearing stress in nut is half the tensile stress in a bolt, then nut length should be equal to
A Diameter of bolt
B 0.75 × diameter of bolt
C 1.25 × diameter of bolt
D 1.5 × diameter of bolt
Which of the following property sets pitch or tone (high or low) for the synthesized speech when reading an element; the pitch may be specified absolutely or relative to the normal pitch for the voice-family used to read the text?
A voice-check
B voice-format
C voice-pitch
D voice-volume
The product of the diametral pitch and circular pitch is equal to
A 1
B 1/π
C π
D 2π
The relation between the pitch of the chain (p) and pitch circle diameter of the sprocket (D) is given by (where T = Number of teeth on the sprocket)
A $${\text{p}} = {\text{D}}\sin \frac{{{{90}^ \circ }}}{{\text{T}}}$$
B $${\text{p}} = {\text{D}}\sin \frac{{{{120}^ \circ }}}{{\text{T}}}$$
C $${\text{p}} = {\text{D}}\sin \frac{{{{180}^ \circ }}}{{\text{T}}}$$
D $${\text{p}} = {\text{D}}\sin \frac{{{{360}^ \circ }}}{{\text{T}}}$$
In a shell and tube heat exchanger having square pitch, the shell side equivalent diameter is given by (where, P = pitch, d = outside diameter of the tube)
A $$\frac{{4\left( {{{\text{p}}^2} - \pi {{\text{d}}^2}/4} \right)}}{{\pi {\text{d}}}}$$
B $$\frac{{{{\text{p}}^2} - \pi {{\text{d}}^2}/4}}{{\pi {\text{d}}}}$$
C $$\frac{{4{{\text{p}}^2}}}{{\pi {\text{d}}}}$$
D $$\frac{{\pi {\text{d}}}}{{4{{\text{p}}^2}}}$$
Triangular pitch tube layout as compared to square pitch in a shell and tube heat exchanger
A Permits the use of less tubes in a given shell diameter
B Facilitates comparatively easier external cleaning because of large clearance
C Permits the use of more tubes in a given shell diameter
D Both B and C

Next steps