Related Questions

When the connected members are very yielding (soft gasket) as compared to the bolt, then the resultant load on the bolt will be equal to the
A Initial tension
B External load applied
C Sum of the initial tension and external load applied
D Initial tension or external load, whichever is greater
The resultant axial load on a bolt depends on
A Initial tension
B External load applied
C Relative elastic yielding (springness) of the bolt and the connected member
D All of the above
The resultant axial load on a bolt depends upon
A External load applied
B Initial tension due to tightening of the bolt
C Relative elastic yielding of the bolt and the connected members
D All of the above
When a bolt is subjected to an external load, the stress induced in the bolt will be
A Tensile stress
B Shear stress
C Combined tensile and shear stress
D Any one of these
When a bolt and nut is made of mild steel, then the effective height of nut is made equal to (where d = Nominal diameter of bolt)
A 0.5 d
B 0.75 d
C d
D 1.25 d
3N ও 2N মানের দুইটি বলের লদ্ধি R । প্রথম বলের মান দ্বিগুণ করলে লদ্ধির মানও দ্বিগুণ হয়। বলদ্বয়ের মধ্যবর্তী কোণের মান হবে- (The resultant of two forces 3N and 2N is R. If the first force is doubled then the resultant is also doubled. The angle between the forces is-)
A 30°
B 45°
C 65°
D 120°
The resultant of two forces P and Q is R. If Q is doubled, the new resultant is perpendicular to P. Then,
A P = R
B Q = R
C P = Q
D None of the above is correct
The resultant of the two forces ‘P’ and ‘Q’ is ‘R’. If ‘Q’ is doubled, the new resultant is perpendicular to ‘P’. Then
A P = Q
B Q = R
C Q = 2R
D None of these
The resultant of the two forces P & Q is R. If Q is doubled, the new resultant is perpendicular to P. Then
A P = Q
B Q = R
C Q = 2R
D Q = 3R
If d is the normal diameter of a bolt in mm, then the initial tension in kg in a bolt used for making a fluid tight joint as for steam engine cover joint is calculated by the relation
A 124 d
B 138 d
C 151 d
D 168 d

Next steps