Related Questions

The frictional torque transmitted in a flat pivot bearing, considering uniform wear, is (where μ = Coefficient of friction, W = Load over the bearing and R = Radius of bearing surface)
A $$\frac{1}{2}$$μWR
B $$\frac{2}{3}$$μWR
C $$\frac{3}{4}$$μWR
D μWR
In order to have a connecting rod equally strong in buckling about X-axis and Y-axis, the moment of inertia about X-axis should be __________ the moment of inertia about Y-axis.
A Equal to
B Twice
C Three times
D Four times
When the bearing is subjected to large fluctuations of load and heavy impacts, the bearing characteristic number should be _________ the bearing modulus.
A 10 times
B 5 times
C 15 times
D 20 times
If p = bearing pressure on projected bearing area, Z = absolute viscosity of lubricant and N = speed of journal, then the bearing characteristic number is given by
A $$\frac{{{\text{ZN}}}}{{\text{p}}}$$
B $$\frac{{\text{p}}}{{{\text{ZN}}}}$$
C $$\frac{{\text{Z}}}{{{\text{pN}}}}$$
D $$\frac{{\text{N}}}{{{\text{Zp}}}}$$
In a journal bearing, the load on the bearing is __________ to the axis of the journal.
A Parallel
B Perpendicular
C Both A and B
D None of these
A disc is a spinning with an angular velocity $$\omega $$ rad/s about the axis of spin. The couple applied to the disc causing precession will be (where $$I$$ = Mass moment of inertia of the disc and $$\omega {\text{P}}$$  = Angular velocity of precession of the axis of spin)
A $$\frac{1}{2}I{\omega ^2}$$
B $$I{\omega ^2}$$
C $$\frac{1}{2}I\omega \omega {\text{P}}$$
D $$I\omega \omega {\text{P}}$$
In order to prevent tool from rubbing the work _________ on tools are provided.
A Rake angles
B Relief angles
C Face angles
D None of these
In a boundary lubricated bearing, there is a __________ of lubricant between the journal and the bearing.
A Thick film
B Thin film
C Either A or B
D None of these
A sliding bearing in which although lubricant is present, the working surfaces __________ contact each other at least part of the time, is called boundary lubricated bearing.
A Partially
B Fully
C Either A or B
D None of these
The depth ‘d’ below the free surface at which the point velocity is equal to the average velocity of flow for a uniform laminar flow with a free surface, will be (where D is the depth of flow)
A 0.423 D
B 0.577 D
C 0.223 D
D 0.707 D

Next steps