Related Questions

The rectangular beam 'A' has length ‘l’, width ‘b’ and depth ‘d’. Another beam 'B' has the same length and depth but width is double that of 'A'. The elastic strength of beam 'B' will be _________ as compared to beam ‘A’.
A Same
B Double
C Four times
D Six times
A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be __________ as compared to beam 'A'.
A One-fourth
B One-half
C Double
D Four times
The rectangular beam 'A ' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.
A Same
B One-half
C One-fourth
D One-eighth
The rectangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and width but depth is double that of 'A'. The elastic strength of beam B will be __________ as compared to beam A.
A Same
B Double
C Four times
D Six times
Solution X contains 7% (by weight) of liquid M and solution Y contains 14.5% (by weight) of liquid M. If 3 grams of solution X is mixed with 2 grams of solution Y, then liquid M accounts for what percent of the weight of the resulting solution?
A 6.09%
B 10%
C 10.75%
D 21.5%
100 kg of solution A is mixed with 60 kg of solution B . If solution A has tin and copper in the ratio 1: 4 and solution B has lead and tin in the ratio 3 :2 then what is the amount of tin in the new solution?
A 70 kg
B 36 kg
C 44 kg
D 56 kg
Solution X is 10% percent alcohol by volume, and solution Y is 30 percent alcohol by volume. How many milliliters of solution Y must be added to 200 milliliters of solution X to create a solution that is 25 percent alcohol by volume?
A 600
B 800
C 300
D 250
E None of these
A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is
A 0.207
B 0.307
C 0.407
D 0.508
The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is
A $$\frac{5}{8}$$
B $$\frac{8}{5}$$
C $$\frac{5}{4}$$
D $$\frac{4}{5}$$
An emulsion is a colloidal solution of
A Liquid in liquid
B Solid in liquid
C Gas in solid
D Solid in Solid

Next steps