The radiation initially produced in fluorescent tube is

The radiation initially produced in fluorescent tube is Correct Answer Ultraviolet

The primary radiation that is initially produced within a fluorescent lamp is analogous to that emitted by a low pressure mercury lamp. Fluorescent lamps produce UV radiation by ionizing low-pressure mercury vapour. A phosphorescent coating on the inside of the tubes absorbs the UV and converts it to visible light.
Bissoy MCQ

Related Questions

Which of the following components of the X-ray fluorescent spectrometer induces fluorescent radiation?
The solar radiation that is felt at the earth’s surface includes (i) Direct radiation that has passed through the atmosphere (ii) Diffuse radiation from the sky (iii) Absorbed radiation from the water Identify the correct statement
Consider the following statements:
1. The variation in an average annual range of temperature at 15° latitude of Southern Hemisphere is much less than that at 15° latitude of Northern Hemisphere.
2. At latitudes poleward of 35° the incoming radiation exceeds the outgoing radiation in. Northern Hemisphere, whereas in Southern Hemisphere the outgoing radiation exceeds the incoming radiation.
Which of the statements given above is/are correct?
You generate a fluorescent probe against a gene that has been deleted. You expose the DNA to the probe and observe it under fluorescent microscope. What will you see?
What are fluorescent molecules and fluorescent dyes also termed as?
Assertion (A): Light Emitting Diode (LED) lamps offer longer service life as compared to Compact Fluorescent Lamps (CFL).
Reason (R): Light Emitting Diodes (LED) lamps are more energy efficient as compared to the Compact Fluorescent Lamps (CFL).
Select the correct answer:
A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube without fin
Consider a capillary tube in which water has risen. The contact angle is θ. The radius of the capillary tube is ‘r’. The surface tension is ‘S’. And the density of water is ‘ρ’. What is the expression for the height of water risen in the tube? Assume the radius of meniscus to be ‘R’. Let the height of water risen in the tube be ‘h’.
A tapered tube of length 8cm and end diameters 2cm and 4cm connects two vessels containing mixtures of A and B. if the tapered tube is replaced with a cylindrical tube of diameter 6cm, what will be the required length of the cylindrical tube to maintain the same flow rate as in the previous case?
A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube with fin