Which of the following is a key board command to copy some text in MS word ?

A Shift + Copy
B Shift + C
C Alt + G
D Ctrl + C

Correct Answer: Ctrl + C

Control + C is a common computer command. It is generated by pressing the C key while holding down the Ctrl key on most computer keyboards. In graphical user interface environments that use the control key to control the active program, control + C is often used to copy highlighted text to the clipboard. 
Bissoy MCQ
#গণিত #Agrani bank Ltd #Agrani bank Ltd - Senior Officer - 09.06.2017

Related Questions

At a photocopy center , the first 10 copies cost x taka each. Each of the next 50 copies costs 2 taka less per copy . From the 61 st copy on, the cost 1 Taka per copy, In terms of x how much does it cost in. Taka to have 200 copies made/
A 10x+240
B 50x-10
C 50(x-5)
D 60x+140
Which of the following is a keyboard command to copy some text in MS Word?
A Shift+Copy
B Shift+C
C Alt+G
D Ctrl+C
 Which key board command is used to underline a word or sentence is Ms Word?
A Alt+U
B Ctrl+U
C Alt+L
D Ctrl+Alt+U
Rahim wants to cut a rectangular board into indentical square piece. If the board is 18 inched by 30 inches what is the least number of square pieces he can cut without wising any of the board?
A 4
B 6
C 9
D 15
Two boards are being cut for a construction project. If the total length of the boards is 100 inches and the shorter board is 5 inches less than half the length of the longer board , what is the length of the shorter board?
A 25 inches
B 30 inches
C 35 inches
D 70 inches
Two boards are being cut for a construction project . If the total length of the boards is 100 inches and the shorter board is 5 inches less than half the length of the longer board, what is the length of the shorter board ?
A 65 inches
B 75 inches
C 70 inches
D 80 inches
Two boards are being cut for a construction project. If the total length of the boards is 100 inches and the shorter board is 5 inches less than half the length of the longer board, what is the length of the shorter board?
A 65 inches
B 75 inches
C 70 niches
D 80 inches
When a body is subjected to direct tensile stresses ($${\sigma _{\text{x}}}$$ and $${\sigma _{\text{y}}}$$) in two mutually perpendicular directions, accompanied by a simple shear stress $${\tau _{{\text{xy}}}}{\text{,}}$$  then in Mohr's circle method, the circle radius is taken as
A $$\frac{{{\sigma _{\text{x}}} - {\sigma _{\text{y}}}}}{2} + \tau $$
B $$\frac{{{\sigma _{\text{x}}} + {\sigma _{\text{y}}}}}{2} + \tau $$
C $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
D $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
How many keys are available in the Numerical Key Pad of a standard Key-board ?
A 20
B 15
C 17
D 13
A machine can copy six pages in 9 seconds. How many pages can it copy in 24 minutes?
A 12
B 16
C 36
D 960

Next steps