Transverse fillet welds are designed for

A tensile strength
B shear strength
C bending strength
D none of these

Correct Answer: tensile strength

Argentina, Uruguay, the United States and Yugoslavia each won their respective groups to qualify for the semi - finals. In the final, hosts and pre - tournament favourites Uruguay defeated Argentina 4 – 2 in front of a crowd of 68,346 people, and became the first nation to win the World Cup.
Bissoy MCQ
#সাধারণ বিজ্ঞান #Bangladesh Bank #রাসায়নিক ক্রিয়া #Assistant Director (Engineering -Mechanical) | 11.01.2019

Related Questions

Transverse fillet welded joints are designed for
A Tensile strength
B Compressive strength
C Shear strength
D Bending strength
A double fillet welded joint with parallel fillet weld of length '$$l$$' and leg 's' is subjected to a tensile force 'P'. Assuming uniform stress distribution, the shear stress in the weld is given by
A $$\frac{{\sqrt 2 {\text{P}}}}{{{\text{s}}l}}$$
B $$\frac{{\text{P}}}{{2{\text{s}}l}}$$
C $$\frac{{\text{P}}}{{\sqrt 2 {\text{s}}l}}$$
D $$\frac{{2{\text{P}}}}{{{\text{s}}l}}$$
In a transverse fillet welded joint, the size of weld is __________ the throat of weld.
A 0.5 times
B Equal to
C 2 times
D Double
In multipass welds, shot peening is done after each pass to
A Close the surface porosity
B Break the continuity of columnar grains
C Flatten the weldment
D Introduce texture in the weld
The effective length of a fillet weld should not be less than
A Two times the weld size
B Four times the weld size
C Six times the weld size
D Weld size
A fillet is a rounded surface on the ________ corner of a part.
A Inside
B Outside
C Radial
D Isoplane
The purpose of providing fillet in a rail section is to
A Increase the lateral strength
B Increase the vertical stiffness
C Avoid the stress concentration
D Reduce the wear
Shear strength of the welded joint for double parallel fillet is (where $$\tau $$ = Allowable shear stress for weld metal)
A $$0.5\,{\text{s}}l\tau $$
B $${\text{s}}l\tau $$
C $$\sqrt 2 \,{\text{s}}l\tau $$
D $$2\,{\text{s}}l\tau $$
The tensile strength of the welded joint for double fillet is (where s = Leg or size of the weld, $$l$$ = Length of weld and $${\sigma _{\text{t}}}$$ = Allowable tensile stress for weld metal)
A $$0.5\,{\text{s}}l{\sigma _{\text{t}}}$$
B $${\text{s}}l{\sigma _{\text{t}}}$$
C $$\sqrt 2 \,{\text{s}}l{\sigma _{\text{t}}}$$
D $$2\,{\text{s}}l{\sigma _{\text{t}}}$$
Reactors designed for propulsion applications are designed for
A Natural uranium
B Enriched uranium
C Pure uranium
D Any type of uranium

Next steps