Which one of the following is true regarding VLANs?

Which one of the following is true regarding VLANs? Correct Answer VTP is used to send VLAN information to switches in a configured VTP domain.

Switches do not propagate VLAN information by default; you must configure the VTP domain. VLAN Trunking Protocol (VTP) is used to propagate VLAN information across a trunk link.
Bissoy MCQ

Related Questions

A switch has been configured configured for three different VLANs : VLAN2, VLAN3 and VLAN4. A router has been added to provide communication between the VLANs. What minimum type of interface necessary on the router if only one connection is to be made between the router and the switch?
A switch has been configured for three different VLANs: VLAN2, VLAN3, and VLAN4. A router has been added to provide communication between the VLANs. What type of interface is necessary on the router if only one connection is to be made between the router and the switch?
Which of the following is true regarding VLANs?
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?
1. Each end of the trunk link must be set to the IEEE 802.1e encapsulation.
2. The VTP management domain name of both switches must be set the same.
3. All ports on both the switches must be set as access ports.
4. One of the two switches must be configured as a VTP server.
5. A rollover cable is required to connect the two switches together.
6. A router must be used to forward VTP traffic between VLANs.
Which of the following are benefits of VLANs?
1. They increase the size of collision domains.
2. They allow logical grouping of users by function.
3. They can enhance network security.
4. They increase the size of broadcast domains while decreasing the number of collision domains.
5. They simplify switch administration.
6. They increase the number of broadcast domains while decreasing the size of the broadcast domains.
When a new trunk link is configured on an IOS-based switch, which VLANs are allowed over the link?
Security methods such as private encryption, VLANs and firewalls comes under __________ subject area.
If a switch has three computers connected to it, with no VLANs present, how many broadcast and collision domains is the switch creating?
Security methods such as private encryption, VLANs and firewalls comes under . . . . . . . . subject area.