Sending a file from your personal computer's primary memory or disk to another computer is called

Your network contains 10 domain controllers, 10 member servers, and approximately 1,000 client computers. All the servers run Windows 2000 Server, and all the client computers run Windows 2000 Professional. Two of the domain controllers act as DNS servers. Users of client computers use file sharing to grant access to files stored locally. The network has 10 subnets and uses TCP/IP as the only network protocol. You want to configure the network so that all computers can resolve the addresses of all other computers by using DNS. Client computers must be able to register and resolve addresses if a server fails. How should you configure the DNS servers?

A

Configure one server with a standard primary zone for the domain, and configure at least one server with standard secondary zone

B

Configure one server with a standard primary zone for the domain, and configure at least one server with an Active Directory integrated primary zone

C

Configure one server with an Active directory integrated primary zone for the domain, and configure at least one server with a standard secondary zone

D

Configure at least two servers with Active Directory integrated primary zones for the domain

E

Configure at least two servers with standard primary zones for the domain

You want to implement Active Directory on your Windows 2000 network. Your network consists of Windows 2000 Server computers, Windows 2000 Professional computers, Windows NT Workstation 4.0 computers, and Windows 98 computers. You want to achieve optimum functionality of all the client computers with Active Directory. What should you do?

A

Install the Directory Service Client on all of the Windows 98 computers.

B

Upgrade all of the Windows 98 computers to Windows 2000 Professional

C

Upgrade all of the Windows NT Workstation 4.0 computers and Windows 98 computers to Windows 2000 Professional

D

Nothing. Windows 2000 will automatically detect all client computers and optimize them to function with Active Directory.

You are the administrator of Windows 2000 Server computer. Your computer has a span volume that consists of areas on three physical hard disks on the server. The three disks support hot swapping. You regularly backup the span volume by using windows backup. One of the disk fail, you replace the disk with a new un-partitioned disk. You want to recover the span volume and disk data as soon as possible. What should you do?

A

Extend the span volume to include the new disk, rescan the disk

B

Extend the span volume to include the new disk, shut down and restart the server, use windows backup to restore the data

C

Re scan the disk, format the span volume. Use windows back up to restore the data

D

Re scan the disk, extend the span volume to include the new disk. Shut down and restart the server, use windows backup to restore the new data

E

Re scan the disk, remove the span volume and create a new span volume that includes the new disk. Format the span volume, use Windows back up to restore the data

You install your boot volume on volume C on your Windows 2000 Server computer. You mirror volume C on dynamic Disk 1. Two years later, during routine server maintenance, you open Disk Management and find that the status of volume C is Failed Redundancy. The status of Disk 1 is Missing. You attempt to reactivate Disk 1, but the status of volume C does not return to Healthy. What should you do next?

A

Replace Disk 1 and restart the computer. The mirror will automatically regenerate

B

Remove the mirror on Disk 1, replace the disk, and then add back the mirror to the new Disk 1

C

Replace Disk 1 and copy all data from volume C to a new NTFS primary partition on the new Disk 1. Restart the computer

D

Rescan the disks, remove the mirror, and delete the data on Disk 1. Then re-create the mirror

E

None of above

Directions : In each of the following questions a statement is given, followed by two conclusions. Give answer :

Statement : "Everyone desires to buy a personal computer", statement of a college student.

Assumptions :
I. Personal computers are not a need but a luxury.
II. Use of personal computers improves quality of skill.

A

Only assumption I is implicit

B

Only assumption II is implicit

C

Either I or II is implicit

D

Neither I nor II is implicit

E

Both I and II are implicit

Your Windows 2000 Server computer contains a stripe set with parity on a four-disk array. You convert the stripe set with parity to a dynamic RAID-5 volume. Six months later, users report that disk access on the server is slower than it had been on the previous day, You use Disk Management and discover that the status of the third disk in the array is Missing. You want to recover the failed RAID-5 volume. What should you do first?

A

Replace the third disk and restart the server. Use disk Management to repair the volume

B

Ensure that the third disk is attached to the server and has power. Use Disk Management to reactivate the disk

C

Ensure that the third disk is attached to the server and has power. Use Disk Management to repair the volume

D

Install a new disk and create a single extended partition on the new disk. Restart the computer and allow Windows 2000 to automatically repair the volume on the extended partition

E

None of above

Your Windows 2000 Server computer contains a stripe set with parity on a four-disk array. You convert the stripe set with parity to a dynamic RAID-5 volume. Six months later, users report that disk access on the server is slower than it had been on the previous day. You use Disk Management and discover that the status of the third disk in the array is missing. You want to recover the failed RAID-5 volume. What should you do first?

A

Replace the third disk and restart the server. Use Disk Management to repair the volume

B

Ensure that the third disk is attached to the server and has power. Use Disk Management to reactivate the disk

C

Ensure that the third disk is attached to the server and has power. Use Disk Management to repair the volume

D

Install a new disk and create a single extended partition on the new disk. Restart the computer and allow Windows 2000 to automatically repair the volume on the extended partition

E

None of above

S₁: The 'age of computers' is considered to have begun in 1946.
P: Those early computers were huge and heavy affairs, with problems of speed and size.
Q: It was only with the introduction of electronics that the computers really came of age.
R: But computers were in use long before that.
S: They had several rotating shafts and gears which almost always doomed them to slow operation.
S₆: And now it is difficult to find a field where computers are not used.

The Proper sequence should be:

A

PRQS

B

PRSQ

C

RPQS

D

RPSQ

Your network uses TCP/IP as the only network protocol. Devices on the network are configured to use IP address from the private 10.0.0.0 range. All the client computers on the network runs Windows 2000 Professional. The network includes Windows 2000 Server computers and UNIX servers. User's print jobs are sent to shared printers on a Windows 2000 Server computer named PrintServ that directs the print jobs to print devices attached directly to the network. You have a high-capacity print device that is attached to one of the UNIX servers. The UNIX computer uses the LPR printing protocol, and it's IP address is 10.1.1.99. The name of the printer queue is GIANT. You want users to be able to connect to this printer from their computers. What should you do?

A

Install Microsoft Print Services for Unix on PrintServ. Create a network printer on users' computers, and specify that the printer URL is LPR://10.1.1.99/ GIANT

B

Install Microsoft Print Services for Unix on users* Computers. Create a network printer, and specify that the printer name is \10.1.1.99GIANT

C

Create a network printer on PrintServ, and specify that the printer name is \16.1.1.99GIANT. Share this printer and connect to it from users computers

D

Create a local printer on PrintServ. Create a new TCP/IP port for an LPR server at address 10.1.1.99 with a queue name of GIANT. Share this printer and connect to it from users' computers

E

None of above

In your company, 2 Ethernet Networks are connected with a router. All network connections run TCP/IP. Your new client computer can access only the computers on your side of the router. All other computers are able to access one another. What is the most likely cause of the problem?

A

incorrect termination of the destination network

B

defective network adapter in the router

C

incorrect subnet mask on your client computer

D

malfunctioning repeater

E

None of the above

Sending a file from your personal computer's primary memory or disk to another computer is called

Related Questions