Related Questions

How is the degree of emulsion polymerization related to the monomer concentration, and the rate of radical generation, Ri? , inversely proportional to Ri b) inversely proportional to Ri, directly proportional to . c) directly proportional to Ri, independent of . d) directly proportional to , independent of Ri
The odds favouring the event of a person hitting a target are 3 to 5. The odds against the event of another person hitting the target are 3 to 2. If each of them fire once at the target, find the probability that both of them hit the target.
Dev can hit a target 3 times in 6 shots pawan can hit the target 2 times in 6 shots and Lakhan can hit the target 4 times in 4 shots. What is the probability that at least 2 shots hit the target -
In a shell and tube heat exchanger, the overall heat transfer co-efficient is proportional to the tube side (volumetric flow rate)0.8. This is valid, only when the ratio of the tube side film resistance to the total resistance is almost equal to
A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube without fin
Consider a capillary tube in which water has risen. The contact angle is θ. The radius of the capillary tube is ‘r’. The surface tension is ‘S’. And the density of water is ‘ρ’. What is the expression for the height of water risen in the tube? Assume the radius of meniscus to be ‘R’. Let the height of water risen in the tube be ‘h’.
A tapered tube of length 8cm and end diameters 2cm and 4cm connects two vessels containing mixtures of A and B. if the tapered tube is replaced with a cylindrical tube of diameter 6cm, what will be the required length of the cylindrical tube to maintain the same flow rate as in the previous case?
A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube with fin
Air flows through a 10 cm internal diameter tube at the rate of 75 kg/hr. Measurements indicate that at a particular point in the tube, the pressure and temperature of air are 1.5 bar and 325 K whilst the tube wall temperature is 375 K. Find heat transfer rate from one meter length in the region of this point The general non-dimensional correlation for turbulent flow in the tube is Nu = 0.023 (Re) 0.8 (Pr) 0.4 Where the fluid properties are evaluated at the bulk temperature
A volatile solid material is placed in a tube and vacuum is created inside the tube. If the tube is heated and the solid vaporizes the weight of the material + tube will