The components of state of stress at a point in x - y plane are given as σxx = 5 MPa, σyy = 10MPA and $${\tau _{xy}}$$ = 2MPa. The sum of the principal stresses acting on the x - y plane in MPa is

The components of state of stress at a point in x - y plane are given as σxx = 5 MPa, σyy = 10MPA and $${\tau _{xy}}$$ = 2MPa. The sum of the principal stresses acting on the x - y plane in MPa is Correct Answer 15

Bissoy MCQ

Related Questions

The 3-dimensional state of stress consists of 3 unequal principal stresses acting on a point, this is called the triaxial state of stress. If two of the three principal stresses are equal, the state of stress is known as __________
The three-dimensional state of stress consists of 3 unequal principal stresses acting on a point, this is called the triaxial state of stress. If all the three principal stresses are equal, the state of stress is known as __________
A body starts yielding when it is subjected to stress state with principal stresses of 250 MPa, 50 MPa and - 50 MPa. What is the yield strength of the material. in MPa, if Tresca yield criterion is obeyed?
A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The minimum normal stress will be
A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum shear stress will be
If p1 and p2 are mutually perpendicular principal stresses acting on a soil mass, the normal stress on any plane inclined at angle $${\theta ^ \circ }$$ to the principal plane carrying the principal stress p1, is:
Tresca or maximum-shear stress criteria assumes that yielding occurs when the maximum shear stress reaches a value of the shear stress in the uniaxial tension test. Assume the principal stress being σ1, σ2, σ3 where σ1 is largest, and σ3 is the smallest principal stresses. Find the value of minimum shear stress to cause yielding, given that yield stress in tension is equal to σo?
If a body is subjected to stresses in xy plane with stresses of 60N/mm² and 80N/mm² acting along x and y axes respectively. Also the shear stress acting is 10N/mm². Find the inclination of the plane in which shear stress is maximal.
Consider the following statements: X. Two-dimensional stresses applied to a thin plater in its own plane represent the plane stress condition. Y. Normal and shear stresses may occur simultaneously on a plane. Z. Under plane stress condition, the strain in the direction perpendicular to the plane is zero. Which of the above statements are correct?