When one of the fluids is highly corrosive and has fouling tendency, it should

When one of the fluids is highly corrosive and has fouling tendency, it should Correct Answer Preferably flow inside the tube for its easier internal cleaning

Bissoy MCQ

Related Questions

Statement 1: For non-Newtonian fluids, another term called apparent viscosity is used as their viscosity changes with the change in the shear rate. Statement 2: For non-Newtonian fluids, between the transition region, the power number for non-Newtonian fluids is slightly higher than that for Newtonian fluids.
Tube wall thickness depends on the cor-rosiveness of the fluids and their operating pressure & temperature and is specified by Birmingham wire gauge (B.W.G)-a number which varies from 8 to 18 with the numbers 14 and 16 being more commonly used. Outside diameter of tubes varies from about 15 to 50 mm; however a tube of less than __________ mm outside diameter is generally not recommended for fouling fluids.
__________ tower is the most suitable gas-liquid contacting device involving highly corrosive fluids.
Statement 1: In μ_a= τ/γ = Kγ(n-1) , n = consistency index and K is the flow behaviour index. Statement 2: n= 1 for Newtonian fluids, n<1 for dilatant fluids and n>1 for pseudo plastic fluids.
Which of the following terms means the tendency of a supervisor to rate a subordinate lower than his performance? 1. Horns Effect 2. Halo Effect 3. Central Tendency 4. Pointing Tendency
A single pass shell and tube heat exchanger, consisting of a bundle of 100 tubes (inner diameter 25 mm and thickness 2 mm) is used for heating 28 kg/s of water from 25 degree Celsius to 75 degree Celsius with the help of a steam condensing at atmospheric pressure on the shell side with condensing heat transfer coefficient 5000 W/m2 degree. Make calculation for overall heat transfer coefficient based on the inner area. Take fouling factor on the water side to be 0.002 m2 degree/W per tube and neglect effect of fouling factor on the shell side and thermal resistance of the tube wall
The important design and operating considerations for Extended-Surface Compact Heat Exchangers are: (1) Both fluids may have high or low heat transfer coefficients (2) As the tubes are very narrow (low DH), the fluid used should not be corrosive as effective cleaning of tubes is not possible. (3) The fluid pressure drop calculation is important as a regulatory method to ensure long life of the tubes. (4) Unlike shell and tube type heat exchangers, these are limited when it comes to operating pressure and temperature.
A non-aqueous substance produces pH of the corrosive standards when mixed with water is considered to have corrosive character.
Are these statements about the distillateto concentrate ratio in evaporators true? Statement 1: Lack of wall wetting causes fouling. Statement 2: Fouling depends on the fluid velocity.
Which one of the following batch-type dryer is the most versatile one, which can handle fouling to sensitive fluids?